Washer, Plain, 6mm Ct200 Trail 1964 Usa
The 9410106000 Washer, Plain, 6mm can be ordered. View linked machines. 94101-06000 is the manufacturercode.
CT200 TRAIL 1964 USA WASHER, PLAIN, 6MM 9410106000, for Honda
description
So before placing your order for this replacement fastener related component check our online schematic for your model and get even better value!
fits models
customers also bought
where used
The Washer, Plain, 6mm appears in these Ct200 Trail 1964 Usa parts lists:
- Front Fork / Horn
- used 5 x in Front Fork / Horn
- Fuel Tank / Luggage Carrier
- used 5 x in Fuel Tank / Luggage Carrier
- Handlebar
- used 4 x in Handlebar
- Muffler
- used 3 x in Muffler
- Swingarm / Drive Chain
- used 2 x in Swingarm / Drive Chain
- Wire Harness
- used 2 x in Wire Harness
- Air Cleaner / Tools
- used 1 x in Air Cleaner / Tools
- Main Stand / Step Bar
- used 1 x in Main Stand / Step Bar
also in this parts list
NUT,THIN, 5 MM | 9400205000
NUT,CASTLE,8MM | 94011080000S
NUT,HEX,CAP,6MM | 9402106020
NUT BLIND 8MM | 94022080200S
NUT,HEX 6MM | 9403006000
NUT,HEX 8MM | 9403008000
NUT,HEX.,8MM | 9403108000
WASHER PLAIN 6MM | 9410106080
forum
If you want to discuss this WASHER, PLAIN, 6MM, please go the forum and post a message.For questions about Honda Ct200 Trail 1964 Usa, please write a message in the forum.
Ct200 Trail 1964 Usa forum
posts from the Honda CT200 TRAIL 1964 USA forum
Re: valve clearance / pushrods
hey,
I figured it out. I found a copy of a manual online which showed the valve clearance and p..
Re: valve clearance / pushrods
By pushrod, are you referring to the valve stem, or the cam lobe?
valve clearance / pushrods
What is the valve clearance for int/exh. Also
Which pushrod is the long one, intake or exhaust? ??
Re: Piston size
Measure the piston in Milimetres, you can then check the bore dimensions on Wiki.
Re: Piston size
Oops it is honda ct200 trail 90
Washer, Plain, 6mm forum
Posts from the Honda WASHER, PLAIN, 6MM forum
discuss this product