forum has been disabled, posting not possible
Honda CB160 SPORT 160 US Forum
carb rebuild
Honda CB160 SPORT 160 US Forum
posted: Monday, January 23, 2012 06:49
Subject: carb rebuild
Subject: carb rebuild
Hi just used keyster carb kits rebuilt both but now gas is coming out over flow tubes not a drip but a good flow any help.thanks Terry
reply to this
posted: Tuesday, February 19, 2013 12:46
Subject: Re: carb rebuild
Hi
You need to trim the float gasket exactly to fit the chamber - it is slightly over size and causes the floats to stick.
Also if possible use the original needles as the keyster ones are slightly too 'blunt'. reply to this
Subject: Re: carb rebuild
Hi just used keyster carb kits rebuilt both but now gas is coming out over flow tubes not a drip but a good flow any help.thanks Terry
Hi
You need to trim the float gasket exactly to fit the chamber - it is slightly over size and causes the floats to stick.
Also if possible use the original needles as the keyster ones are slightly too 'blunt'. reply to this
CMS is an independent supplier of spare parts and has no commercial link with Honda, Suzuki, Yamaha or Kawasaki.