O Ring, 6.8x1.9 Xl250r 1983 (d) Usa
The 91306PJ4000 O Ring, 6.8x1.9 can be ordered. View linked machines. 91306-PJ4-000 is the manufacturercode.
XL250R 1983 (D) USA O RING, 6.8X1.9 91306PJ4000, for Honda
description
To help you order the correct quantity and type of seals, gaskets and other consumables, why not check our online schematic, or if your machine is not supported this way, simply browse the Products Gallery, which will list everything you need for a successful overhaul.
fits models
customers also bought
where used
The O Ring, 6.8x1.9 appears in these Xl250r 1983 (d) Usa parts lists:
- Gasket Kit B
- used 3 x in Gasket Kit B
- Oil Pump
- used 2 x in Oil Pump
- Crankcase Cover Alternator 82-83
- used 1 x in Crankcase Cover Alternator 82-83
also in this parts list
O RING,6.8X1.8 | 91302HA0004
O-RING,13.8X2.5 | 91303MG7003
BOLT,HEX 6X28 | 9200006028
WASHER,PLUG,DRAIN 12 | 9410912000
O-RING,7X1.7 | 91301473003
O-RING,13.8X2.5 | 91303377000
forum
If you want to discuss this O RING, 6.8X1.9, please go the forum and post a message.For questions about Honda Xl250r 1983 (d) Usa, please write a message in the forum.
Xl250r 1983 (d) Usa forum
posts from the Honda XL250R 1983 (D) USA forum
Re: Re: Engine Dies
I haven't checked it while it was in the process of dieing, but I did open the fuel cap afterw..
Re: Engine Dies
Hi, You say you checked the filler cap for a blocked venting hole? Have you tried simply loose..
Engine Dies
My XL250R engine dies after 5 to 10 minutes. I thought it was the carb, so I pulled it and cleaned..
Re: Re: 30410KB7671 CDI Unit
Thanks I'lltry it and get back to you.
vr
Grant
Re: 30410KB7671 CDI Unit
Hi, I am pretty sure that any Honda single cylinder 4-stroke CDI will do the job. Try one from..
O Ring, 6.8x1.9 forum
Posts from the Honda O RING, 6.8X1.9 forum
discuss this product