Bracket, Diag Connecto Kx450-ebf Kx450f 2011 Usa

This KX F.i. Calibration Controller kit can be applied to 2012-2016 KX450F and 2013-2016 KX250F
(with suitable cable the software itself can be used for MY11-12 KX250F and MY11 KX450F)

The Kawasaki KX FI Calibration Controller is a portable handheld tool with a built in color LCD screen. It is resistant to dust (IP-55) easy to use, so no need to use laptop anymore.
It comes with transfer and diagnostic cables, SD memory card, user manual and a carrying case. There is no datalogging function.
Accessing the ECU is accomplished simply by connecting the controller using the provided cables (no PC or battery necessary)
The controller works for 2hr. with built in battery. Maps can be stored on a PC: data transfer between the controller and a PC can be done via SD card. Supplied with AC powerplug for EU and UK.

Including 7 patterns default setting:
Richer or leaner fuel setting (? 5%)
Advanced or retarded ignition setting (? 3 deg.)
Hard or soft riding surface setting
Beginner setting

For more advanced setting optimization, the ECU maps for volume of fuel injected and ignition timing can be adjusted for given throttle position and rpm. When connected to the ECU, the KX FI Calibration Controller can be used to display the status of a running engine.

Following additional parts are needed:
1- 26011-0933 WIRE LEAD (to connect the kit to KX)
2- 11056-0505 Bracket (to fix above cable to KX)