The 90601030000 Circlip, 18mm can be ordered. View linked machines. 90601-030-000 is the manufacturercode.
The Circlip, 18mm appears in these Ct200 Trail 1964 Usa parts lists:
BOLT,HEX 6X8 | 9200006008
WASHER 18 MM | 90461030000
WASHER, THRUST, 1 | 90451001000
BOLT,HEX 6X8 | 92000060080A
PLATE DR SPRK | 23811206000
If you want to discuss this CIRCLIP, 18MM, please go the forum and post a message.For questions about Honda Ct200 Trail 1964 Usa, please write a message in the forum.
posts from the Honda CT200 TRAIL 1964 USA forum
Re: valve clearance / pushrods
hey,
I figured it out. I found a copy of a manual online which showed the valve clearance and p..
Re: valve clearance / pushrods
By pushrod, are you referring to the valve stem, or the cam lobe?
valve clearance / pushrods
What is the valve clearance for int/exh. Also
Which pushrod is the long one, intake or exhaust? ??
Re: Piston size
Measure the piston in Milimetres, you can then check the bore dimensions on Wiki.
Re: Piston size
Oops it is honda ct200 trail 90
Posts from the Honda CIRCLIP, 18MM forum
discuss this product