Sleeve, Cylinder Cb160 Sport 1964 Usa
The 12141217000 Sleeve, Cylinder is (temporarly) unavailable. View linked machines. 12141-217-000 is the manufacturercode.
CB160 SPORT 1964 USA SLEEVE, CYLINDER 12141217000, for Honda
Product is not available, add it to the watch list and receive a notification if it becomes available again.
description
This Sleeve needs to be pressed in and the old Sleeve removed by an overhaul specialist.
The inner diameter then afterwards needs to be bored straight and honed to final size according to owners manual specification (STD size).
Sizes of this Sleeve are:
Inner diameter 49.30mm
Outer diameter 58.11mm
Total length 85.59mm
sealing surface/shoulder 4.16mm thick, 65.45mm diameter
fits models
customers also bought
forum
If you want to discuss this SLEEVE, CYLINDER, please go the forum and post a message.For questions about Honda Cb160 Sport 1964 Usa, please write a message in the forum.
Cb160 Sport 1964 Usa forum
posts from the Honda CB160 SPORT 1964 USA forum
Re: Re: engine
thanks for that just what i suspected but hoped it was not , more work then ,cheers keith
Re: carb rebuild
Hi
You need to trim the float gasket exactly to fit the chamber - it is slightly over size and ..
Re: engine
Hi Keith
Sounds like the valve guides may be worn?
engine
just had my 1964 cb160 rebored .025 oversize because the oil ring had broken on the left pot and w..
carb rebuild
Hi just used keyster carb kits rebuilt both but now gas is coming out over flow tubes not a drip b..
Sleeve, Cylinder forum
Posts from the Honda SLEEVE, CYLINDER forum
discuss this product