The 90703200000 Pin, Knock 10x14 can be ordered. View linked machines. 90703-200-000 is the manufacturercode.
The Pin, Knock 10x14 appears in these Cb160 Sport 1964 Usa parts lists:
PIN,KNOCK 10X14 | 9430110140
WASHER,SEALING | 90441286000
PIN KNOCK 4X15 | 90701216000
PIN KNOCK 6X12.5 | 90701222000
PIN KNOCK 6MM | 90702200000
WASHER,SEALING | 90441216000
WASHER 6MM | 90453216000
If you want to discuss this PIN, KNOCK 10X14, please go the forum and post a message.For questions about Honda Cb160 Sport 1964 Usa, please write a message in the forum.
posts from the Honda CB160 SPORT 1964 USA forum
Re: Re: engine
thanks for that just what i suspected but hoped it was not , more work then ,cheers keith
Re: carb rebuild
Hi
You need to trim the float gasket exactly to fit the chamber - it is slightly over size and ..
Re: engine
Hi Keith
Sounds like the valve guides may be worn?
engine
just had my 1964 cb160 rebored .025 oversize because the oil ring had broken on the left pot and w..
carb rebuild
Hi just used keyster carb kits rebuilt both but now gas is coming out over flow tubes not a drip b..
Posts from the Honda PIN, KNOCK 10X14 forum
discuss this product