Nut, Hex, Cap 8mm Cb160 Sport 1964 Usa
The 90012286000 Nut, Hex, Cap 8mm can be ordered. View linked machines. 90012-286-000 is the manufacturercode.
description
fits models
customers also bought
where used
The Nut, Hex, Cap 8mm appears in these Cb160 Sport 1964 Usa parts lists:
- Cylinder / Cylinder Head
- used 8 x in Cylinder / Cylinder Head
- Upper Crankcase / Shift Drum
- used 1 x in Upper Crankcase / Shift Drum
- Lower Crankcase / Kick Starter
- used 1 x in Lower Crankcase / Kick Starter
also in this parts list
NUT,HEX 8MM | 9402108000
NUT,HEX 6MM | 9403006000
NUT,HEX.,8MM | 9403008200
NUT,HEX.,6MM | 94001062000S
NUT,HEX 8MM | 94021080000S
forum
If you want to discuss this NUT, HEX, CAP 8MM, please go the forum and post a message.For questions about Honda Cb160 Sport 1964 Usa, please write a message in the forum.
Cb160 Sport 1964 Usa forum
posts from the Honda CB160 SPORT 1964 USA forum
Re: Re: engine
thanks for that just what i suspected but hoped it was not , more work then ,cheers keith
Re: carb rebuild
Hi
You need to trim the float gasket exactly to fit the chamber - it is slightly over size and ..
Re: engine
Hi Keith
Sounds like the valve guides may be worn?
engine
just had my 1964 cb160 rebored .025 oversize because the oil ring had broken on the left pot and w..
carb rebuild
Hi just used keyster carb kits rebuilt both but now gas is coming out over flow tubes not a drip b..
Nut, Hex, Cap 8mm forum
Posts from the Honda NUT, HEX, CAP 8MM forum
discuss this product