The 90310KA3711 Nut Hex 6mm can be ordered. View linked machines. 90310-KA3-711 is the manufacturercode.
The Nut Hex 6mm appears in these Cb160 Sport 1964 Usa parts lists:
| 92000080380A
BOLT,HEX.,6X14 | 92101060140A
BOLT,HEX,6X25 | 92101060250A
BOLT,HEX 8X32 | 92101080320B
BOLT, HEX. (6X18) | 9220006018
DRAIN COCK | 9280012000
SCREW,CROSS,5X16 | 93500050160A
BOLT,HEX 6X25 | 9350006025
SCREW,PAN,6X32 | 93500060320A
SCREW,FLAT,6X14 | 93600060140A
If you want to discuss this NUT HEX 6MM, please go the forum and post a message.For questions about Honda Cb160 Sport 1964 Usa, please write a message in the forum.
posts from the Honda CB160 SPORT 1964 USA forum
Re: Re: engine
thanks for that just what i suspected but hoped it was not , more work then ,cheers keith
Re: carb rebuild
Hi
You need to trim the float gasket exactly to fit the chamber - it is slightly over size and ..
Re: engine
Hi Keith
Sounds like the valve guides may be worn?
engine
just had my 1964 cb160 rebored .025 oversize because the oil ring had broken on the left pot and w..
carb rebuild
Hi just used keyster carb kits rebuilt both but now gas is coming out over flow tubes not a drip b..
Posts from the Honda NUT HEX 6MM forum
discuss this product