Forums
On this page you find the latest topics from the forums on this website. When you want to view the complete thread of a forum, simply click the corresponding link below.
Re: Backfiring
EF3800/EF3800E 1996 Forum hi,
1/ check ur jet main the hole is too large, 2/ if not ur inlet valve does not shut in the TDC, then u have to align the marks on the cam shaft and the cranck shaft. i hope this...
EF3800/EF3800E 1996 Forum hi,
1/ check ur jet main the hole is too large, 2/ if not ur inlet valve does not shut in the TDC, then u have to align the marks on the cam shaft and the cranck shaft. i hope this...
Wednesday, September 12, 2007
without main jet in the carb
JET,MAIN #52 Forum without main jet in the carb the engine can't rise to the high speed regime, thre is lot of gaz and poor of air. the exhost make black smog.
JET,MAIN #52 Forum without main jet in the carb the engine can't rise to the high speed regime, thre is lot of gaz and poor of air. the exhost make black smog.
Tuesday, September 11, 2007
81 ct70 minitrail
CT70 TRAIL 70 1981 US Forum i am trying 2 find out if the right hand switch assembly is supposed to have a choke switch on it.my original does not but i ordered one with one on it .can i purchase a peice for my...
CT70 TRAIL 70 1981 US Forum i am trying 2 find out if the right hand switch assembly is supposed to have a choke switch on it.my original does not but i ordered one with one on it .can i purchase a peice for my...
Monday, September 10, 2007
CBR 1000 F
CBR1000F 1000 HURRICANE '96 US Forum Where can i find the engine no. on a CBR 1000 F from 1996? Please help me. Yours MS
CBR1000F 1000 HURRICANE '96 US Forum Where can i find the engine no. on a CBR 1000 F from 1996? Please help me. Yours MS
Sunday, September 09, 2007
1971 Yamaha RT1 360
RT1 1970/1971 Forum Is there any way to find magnetos/coil sources for this year and model of cycle??
RT1 1970/1971 Forum Is there any way to find magnetos/coil sources for this year and model of cycle??
Thursday, September 06, 2007
oil quantity
VT1100C SHADOW 1100 1994 US Forum please I need to know the quantity for the front fork for my Shadow VT1100 year 1994 also if you guys have the oil available.
Thank you
VT1100C SHADOW 1100 1994 US Forum please I need to know the quantity for the front fork for my Shadow VT1100 year 1994 also if you guys have the oil available.
Thank you
Wednesday, September 05, 2007
CD175 sloper
CD175 Forum Will the sloper CD175A upper crankcase fit the CB175 K3(non sloper lower crankcase? If yes, will the CB93 barrel with central chain then fit the complete assembly? You can email me...
CD175 Forum Will the sloper CD175A upper crankcase fit the CB175 K3(non sloper lower crankcase? If yes, will the CB93 barrel with central chain then fit the complete assembly? You can email me...
Wednesday, September 05, 2007
1969 Honda SS125 Sprockets
SPROCKET (42T) Forum as the rear sprocket for this model is no longer available anywhere does anybody know if the sprockets and chain from any other model which is available might fit . i am not too concerned...
SPROCKET (42T) Forum as the rear sprocket for this model is no longer available anywhere does anybody know if the sprockets and chain from any other model which is available might fit . i am not too concerned...
Monday, September 03, 2007
front caliper on my IT200S
CALIPER ASSY. LEFT Forum HELLO?
i've got a probleme!
on my IT200S 1986 (49U type), the caliper fited on it have only one bigger pistons!
so i'm not sure the front of the bike is standart!
i received...
CALIPER ASSY. LEFT Forum HELLO?
i've got a probleme!
on my IT200S 1986 (49U type), the caliper fited on it have only one bigger pistons!
so i'm not sure the front of the bike is standart!
i received...
Sunday, September 02, 2007
over exhaust 4 in 2
YAMAHA XJR1300 -06 GP PERFORMANCE TITAN/CARBON MUFFLER Forum i would like to know if there is an OVER exhaust with titan/carbon muffler 4 in to 2 for my xjr 1300 04 model,if so how much it costs! please do not hesitate to contant with me at my...
YAMAHA XJR1300 -06 GP PERFORMANCE TITAN/CARBON MUFFLER Forum i would like to know if there is an OVER exhaust with titan/carbon muffler 4 in to 2 for my xjr 1300 04 model,if so how much it costs! please do not hesitate to contant with me at my...
Saturday, September 01, 2007
sj50 no spark
SJ50S BALI 1995 E Forum hi all
i cant get no spark on my sj50 .
i have changed the coil,cdi unit ,plug , plenty of battery power engine turning on starter .checked and made good the earth.
run out of...
SJ50S BALI 1995 E Forum hi all
i cant get no spark on my sj50 .
i have changed the coil,cdi unit ,plug , plenty of battery power engine turning on starter .checked and made good the earth.
run out of...
Friday, August 31, 2007
regulator Africa twin
SET,REGULATOR Forum hi, i'm looking for cheaper regulator for honda africa twin rd07 1998..can you help me?
ranceco
Italy
SET,REGULATOR Forum hi, i'm looking for cheaper regulator for honda africa twin rd07 1998..can you help me?
ranceco
Italy
Thursday, August 30, 2007
Exhaust pipes for CB750 FOUR K2
MUFFLER COMP.,EX. Forum Hello,
I need to change the exhaust pipe of my CB750 FOUR K2 (French model).
The ref "n the actual pipes are HM CB750 SL HM 341; HM CB750 SR HM 341; HM CB750 IL HM 341; HM CB750...
MUFFLER COMP.,EX. Forum Hello,
I need to change the exhaust pipe of my CB750 FOUR K2 (French model).
The ref "n the actual pipes are HM CB750 SL HM 341; HM CB750 SR HM 341; HM CB750 IL HM 341; HM CB750...
Wednesday, August 29, 2007
rmx 50
CABLE ASSY, SPEEDOMETER Forum hi i am looking for a speedo cable is it the inner cable i get or the outer covering. could you please let me know asap. could you also tell me how much for a complete front brake caliper?...
CABLE ASSY, SPEEDOMETER Forum hi i am looking for a speedo cable is it the inner cable i get or the outer covering. could you please let me know asap. could you also tell me how much for a complete front brake caliper?...
Tuesday, August 28, 2007
back rack
CD175A5 Forum I just bought a 2002 Rebel. I also have a 2-helmet Givi box that I had on my Majesty. Can I get a rack large enough to accommodate this box on my little Rebel?
Thank you very...
CD175A5 Forum I just bought a 2002 Rebel. I also have a 2-helmet Givi box that I had on my Majesty. Can I get a rack large enough to accommodate this box on my little Rebel?
Thank you very...
Tuesday, August 28, 2007
Honda CD175 Parst list
CD175A5 Forum Hi, I'm just beginning the restoration of a 1978 Honda CD175 (A5, I think!). Does anyone know where I can get a full Honda parts list for this, or slightly earlier, models? I need...
CD175A5 Forum Hi, I'm just beginning the restoration of a 1978 Honda CD175 (A5, I think!). Does anyone know where I can get a full Honda parts list for this, or slightly earlier, models? I need...
Monday, August 27, 2007
mirrors request ?
MIRROR, R. Forum it's seam to be not available but your web site ask for a request............?
What can I do ?
88110MC5004
MIRROR, R.
Only 1 left! € 39.50
19 Not available
price...
MIRROR, R. Forum it's seam to be not available but your web site ask for a request............?
What can I do ?
88110MC5004
MIRROR, R.
Only 1 left! € 39.50
19 Not available
price...
Sunday, August 26, 2007
CB 750 K5
MUFFLER, 1 (B) EXHAUST (OEM) Forum I'm building a cafe racer and like these pipes more the the K5 OEM's ....my question of course will they work on a K5 thanks Gary
MUFFLER, 1 (B) EXHAUST (OEM) Forum I'm building a cafe racer and like these pipes more the the K5 OEM's ....my question of course will they work on a K5 thanks Gary
Thursday, August 23, 2007
does it fit ?
MUFFLER SET, CB500FOUR, CB550FOURK-K2 Forum Would this muffler kit, also fit a CB550K european model year 1977 ? Seems to me, that fitment on model K1/K2 isn't all that different from a K3.
Only different is the shape of the...
MUFFLER SET, CB500FOUR, CB550FOURK-K2 Forum Would this muffler kit, also fit a CB550K european model year 1977 ? Seems to me, that fitment on model K1/K2 isn't all that different from a K3.
Only different is the shape of the...
Thursday, August 23, 2007
Backfiring
EF3800/EF3800E 1996 Forum This generator had sat for a number of years. I had just purchased it off of a friend. 2 years ago I had replaced the carburator for him and all worked fine. I ran it for the first time...
EF3800/EF3800E 1996 Forum This generator had sat for a number of years. I had just purchased it off of a friend. 2 years ago I had replaced the carburator for him and all worked fine. I ran it for the first time...
Wednesday, August 22, 2007