Forums

Re: Bulb headlight Stanley 6V 35/36.5W 
TLR200 REFLEX US Forum

Luck You Jean!

You can get that bulb from this link:
http://www.francelampes.com/pro/catalog/product_info.php?products_id=10228&language=en

You have to take your old bulb apart, then solder in the new bulb. It will save you a fortune!

I'm not so lucky. That 20mm bulb costs about $5.00 US, but the shipping from France is $35.00! I can get the assembly here for about $50.00

Happy trails,
Opie

Rear Wheel Panel Spacer 
RM125 1979 (N) Forum Hello,

I am looking for a rear wheel panel spacer or the dimensions to make one. This is used to separate the rear wheel hub from the brake linkage and shoes. I if I can't find...

Cdi 
SJ50S BALI 1995 E Forum Hi i have one of these bikes and it is restricted in the cdi.

i have brought a new CDI and i cant find it anywhere on the bike.

if there is anything u can do to help and i...

Re: cj360 slipper tensioner  
CJ360T '77 US Forum How about interchangable parts or aftermarket. Anyone know of something else that would work.

EF3800E Owners Manual 
EF3800/EF3800E 1996 Forum Does anyone have, or know where I can download, a .PDF copy of the EF3800E Operators/Owners manual?

Thanks, Kay

n7kh@juno.com

Re: cj360 slipper tensioner  
CJ360T '77 US Forum oef, well if these guys here dont have it.....

Re: Renovating 1973 Honda CB72 
CUSHION ASSY., R.FR. Forum Hi Phil,

The person to give you that info is Bill Silver,
http://www.vintagehonda.com

Ta,

Mike

[url]

Renovating 1973 Honda CB72 
CUSHION ASSY., R.FR. Forum Renovating 1963 Honda CB 72.

I give up! How the hell do you strip the suspension unit to change seals etc?

Thought I'd sorted it when I found the sprung ring buried in the...

Renovating 1963 Honda CB 72 
COVER, R. FR. FORK Forum Renovating 1963 Honda CB 72

Just about to order a couple of front fork covers but I'm thrown by the description "r fr fork" assuming "r" to mean "right". From what I can see,...

cj360 slipper tensioner  
CJ360T '77 US Forum Does anyone know where I can find a cam chain tensioner slipper for my 1977 cj360t? I've tried every place I know.

Re: Honda motosport tank and guard decals 
XL250 MOTOSPORT 250 K0 US Forum hi - new to this so give me a bit of room for improvement! i believe reproductiondecals in canada are the people referred to, but there is a UK reproduction decals/stickers producer...

qa 50 rocker arm setup 
QA50 K1 US Forum does anyone know how to set up the rocker arms and puch rods on a qa 50? what are the clearances.

KEY? 
Keys Forum i have got an st50g-114119 dax, and lost my keys. and can't find the number of the switch, is it possible to know what key i should buy? its an 1976 model

Re: Tapered steering bearings help! 
TAPERED STEERING BEARING KIT Forum Good morning Vaggo,
i think that you must turn the bearing nut 1/4 counterclockwise. That may will help you.

Vlamis Georgios

Re: Re: Re: Honda motosport tank and guard decals 
XL250 MOTOSPORT 250 K0 US Forum Hi Pete. No I found a speedo base and bought that as a spare but I am still looking for a tacho base. Remember it is for the K0 and the cables come out at 90 degrees not the later model...

Re: Re: Honda motosport tank and guard decals 
XL250 MOTOSPORT 250 K0 US Forum hi glenn yes this the chap from new zealand that bought your tacho..managed to find reprodecals and yes they are of a great quality,so thaks for your reply and hope your bike is coming...

Re: Honda motosport tank and guard decals 
XL250 MOTOSPORT 250 K0 US Forum Reply to Pete Salisbury,
G'day Pete, I am also restoring an Xl250K0 and I sourced some magnificent reproductions of decals from Canada. Cost around AU$115 all up including Warning...

Tapered steering bearings help! 
TAPERED STEERING BEARING KIT Forum I have a tapered steering beering kit for my 1976 CB400F that I have put on the bike and can't seem to make it work right. Anybody know what the preload (torque preload) should be?
I...

Honda CB100 Front fork 
CB100 SUPER SPORT K1 US Forum I have a 1973 CB100, does anybody know how much fork oil each fork leg takes?
Erik, Norway.

cap chamber 
CAP-CHAMBER Forum do you stock the keihin make of chamber caps for the kdx125 -b1 1991 model