Forums
On this page you find the latest topics from the forums on this website. When you want to view the complete thread of a forum, simply click the corresponding link below.
Holder location
HOLDER,JET Forum Hi
When I opened my carburetor to clean it the holder felt on the floor
And I couldn't t see where it is suppose to go back and in what position?
Mine is a little bit damaged so...
HOLDER,JET Forum Hi
When I opened my carburetor to clean it the holder felt on the floor
And I couldn't t see where it is suppose to go back and in what position?
Mine is a little bit damaged so...
Monday, September 11, 2017
Re: Petcock
CL90 SCRAMBLER 90 US Forum
If you have the bowl off. fuel will flow regardless of...
CL90 SCRAMBLER 90 US Forum
Original let fuel pass through in every position...
on Res s. Ordered a replica and same thing
What am I missing?
on Res s. Ordered a replica and same thing
What am I missing?
If you have the bowl off. fuel will flow regardless of...
Sunday, September 10, 2017
Kleur benzine tank
COLLAR,FUEL TANK Forum Weet iemand de kleurcode(zwart) van de tank en frame die behoren bij de varadero 1000xl 2004 in de kleurstelling grijs zwart? Het grijs is nh480m maar ik kan de code van het zwart niet...
COLLAR,FUEL TANK Forum Weet iemand de kleurcode(zwart) van de tank en frame die behoren bij de varadero 1000xl 2004 in de kleurstelling grijs zwart? Het grijs is nh480m maar ik kan de code van het zwart niet...
Wednesday, September 06, 2017
Pipe pivot stand
(50526-399-000) PIPE,STAND PIVOT Forum Hi all, does anyone know if this item hold the brake pedal? How easy is it to fit? Any advice will be greatly appreciated. Thanks, Steve
(50526-399-000) PIPE,STAND PIVOT Forum Hi all, does anyone know if this item hold the brake pedal? How easy is it to fit? Any advice will be greatly appreciated. Thanks, Steve
Tuesday, September 05, 2017
colours and code
LID,MAINT*NH200R* Forum Now the inspection lid for the Honda SH 125 is getting rare, what does NH200R mean at the end of the code number? Is it the colour code, if so what part number/code is required for...
LID,MAINT*NH200R* Forum Now the inspection lid for the Honda SH 125 is getting rare, what does NH200R mean at the end of the code number? Is it the colour code, if so what part number/code is required for...
Monday, September 04, 2017
Cb750 output shaft seal
OIL SEAL, Forum Hi I bought this seal for my 750. The shaft is 29.77mm external and the seal is 27.45 internal and will not fit onto the shaft. Are there different shafts on other models. ?
OIL SEAL, Forum Hi I bought this seal for my 750. The shaft is 29.77mm external and the seal is 27.45 internal and will not fit onto the shaft. Are there different shafts on other models. ?
Sunday, September 03, 2017
Re: Re: Re: Re: Re: Takegawa complete dry clutch kit wanted
(02-02-0141) DRY CLUTCH KIT (ONLY FOR 002-04-250) DREAM50 Forum
Hello Ellis
I'm looking for the 6 speed type . If you could let me know what you find that would be great thank you very much regards
Ollie
Hello Ollie,
I have two answers for you. I have a complete Takegawa kit less the right cover. Yours if you want it. Another way to go, and the way I ended up going is to use the NECTO APE100 dry clutch kit. If you go the NECTO route, it all matches up to the Dream 50, except for the right cover. That matches up, but the oil feed for the right end of the crank requires the case be modified. If you're interested, I can describe the needed machine work in detail for you.
Ellis
Hello Ellis I'm interested to mod. Necto for my Dream !
What machine work are necesary (in detail)
You have pictures of the work ?
You can help me
Hi Ollie,
I can't send pictures through the forum, at least I can't see a way to do that. You can contact me at eholman@comcast.net and I can send you the pictures. Here's what's required.
A small bit of solid aluminum T6060T6 round bar was machined out to fit the 1205-KF0-003 OIL SEAL (12X20X5) and a groove was machined in to fit the 94520-22000 CIRCLIP (INNER) (22MM) to retain the oil seal. I used the original Dream50 side cover as a guide for these dimensions. This oil seal holder was undercut to match the inside dimensions of the NECTO case's oil feed, there is a steel restrictor installed in the feed way, that needs to be removed to allow the oil seal holder to be pressed in. The extension to the oil seal holder is drilled to the same dimensions as the restrictor to maintain oil pressure. A side view of the part looks like a "T" where the top of the "T" is the oil seal holder and the leg of the "T" is pressed into oil feed way. As you'll see in the pictures, the holder required a small cut out of the wall that forms the clutch housing.
Ellis
(02-02-0141) DRY CLUTCH KIT (ONLY FOR 002-04-250) DREAM50 Forum
Hi Ollie,
I've been looking for one as well. Are you looking for the version for the stock 5 speed or Takegawa's 6 speed transmission? I've been tracking down individual parts and have come up with all of them save for one.
Ellis
I've been looking for one as well. Are you looking for the version for the stock 5 speed or Takegawa's 6 speed transmission? I've been tracking down individual parts and have come up with all of them save for one.
Ellis
Hello all
I'm looking for the complete takegawa dry clutch kit for a Honda dream 50 . Please message me if you have or know someone with one for sale . Also looking for a aluminium petrol tank for the dream 50 .
Thank you
Regards
Ollie
I'm looking for the complete takegawa dry clutch kit for a Honda dream 50 . Please message me if you have or know someone with one for sale . Also looking for a aluminium petrol tank for the dream 50 .
Thank you
Regards
Ollie
Hello Ellis
I'm looking for the 6 speed type . If you could let me know what you find that would be great thank you very much regards
Ollie
Hello Ollie,
I have two answers for you. I have a complete Takegawa kit less the right cover. Yours if you want it. Another way to go, and the way I ended up going is to use the NECTO APE100 dry clutch kit. If you go the NECTO route, it all matches up to the Dream 50, except for the right cover. That matches up, but the oil feed for the right end of the crank requires the case be modified. If you're interested, I can describe the needed machine work in detail for you.
Ellis
Hello Ellis I'm interested to mod. Necto for my Dream !
What machine work are necesary (in detail)
You have pictures of the work ?
You can help me
Hi Ollie,
I can't send pictures through the forum, at least I can't see a way to do that. You can contact me at eholman@comcast.net and I can send you the pictures. Here's what's required.
A small bit of solid aluminum T6060T6 round bar was machined out to fit the 1205-KF0-003 OIL SEAL (12X20X5) and a groove was machined in to fit the 94520-22000 CIRCLIP (INNER) (22MM) to retain the oil seal. I used the original Dream50 side cover as a guide for these dimensions. This oil seal holder was undercut to match the inside dimensions of the NECTO case's oil feed, there is a steel restrictor installed in the feed way, that needs to be removed to allow the oil seal holder to be pressed in. The extension to the oil seal holder is drilled to the same dimensions as the restrictor to maintain oil pressure. A side view of the part looks like a "T" where the top of the "T" is the oil seal holder and the leg of the "T" is pressed into oil feed way. As you'll see in the pictures, the holder required a small cut out of the wall that forms the clutch housing.
Ellis
Saturday, September 02, 2017
Re: Re: Re: Re: Re: takegawa CDI #07 02 17
CB50V Forum
oui , mais la lumière verte du neutral restera allumée à toutes...
CB50V Forum
[
Merci. Est que vous sait exactment quo ons doit faire pour le neutraliser le rev limiteur ? Simon
Merci. Est que vous sait exactment quo ons doit faire pour le neutraliser le rev limiteur ? Simon
oui , mais la lumière verte du neutral restera allumée à toutes...
Saturday, September 02, 2017
gear selector
LEVER ASSY,GEAR SFT Forum I GOT A 1996 ZL 600CC KAWA ELIMINATOR HAVING TROUBLE SELECTING HIGHER GEARS, CAN ANYONE TELL ME IF THIS WILL FIT ON MY BIKE, THANKS
LEVER ASSY,GEAR SFT Forum I GOT A 1996 ZL 600CC KAWA ELIMINATOR HAVING TROUBLE SELECTING HIGHER GEARS, CAN ANYONE TELL ME IF THIS WILL FIT ON MY BIKE, THANKS
Saturday, September 02, 2017
Re: Re: Re: Re: Takegawa complete dry clutch kit wanted
(02-02-0141) DRY CLUTCH KIT (ONLY FOR 002-04-250) DREAM50 Forum
Hello Ellis
I'm looking for the 6 speed type . If you could let me know what you find that would be great thank you very much regards
Ollie
Hello Ollie,
I have two answers for you. I have a complete Takegawa kit less the right cover. Yours if you want it. Another way to go, and the way I ended up going is to use the NECTO APE100 dry clutch kit. If you go the NECTO route, it all matches up to the Dream 50, except for the right cover. That matches up, but the oil feed for the right end of the crank requires the case be modified. If you're interested, I can describe the needed machine work in detail for you.
Ellis
Hello...
(02-02-0141) DRY CLUTCH KIT (ONLY FOR 002-04-250) DREAM50 Forum
Hi Ollie,
I've been looking for one as well. Are you looking for the version for the stock 5 speed or Takegawa's 6 speed transmission? I've been tracking down individual parts and have come up with all of them save for one.
Ellis
I've been looking for one as well. Are you looking for the version for the stock 5 speed or Takegawa's 6 speed transmission? I've been tracking down individual parts and have come up with all of them save for one.
Ellis
Hello all
I'm looking for the complete takegawa dry clutch kit for a Honda dream 50 . Please message me if you have or know someone with one for sale . Also looking for a aluminium petrol tank for the dream 50 .
Thank you
Regards
Ollie
I'm looking for the complete takegawa dry clutch kit for a Honda dream 50 . Please message me if you have or know someone with one for sale . Also looking for a aluminium petrol tank for the dream 50 .
Thank you
Regards
Ollie
Hello Ellis
I'm looking for the 6 speed type . If you could let me know what you find that would be great thank you very much regards
Ollie
Hello Ollie,
I have two answers for you. I have a complete Takegawa kit less the right cover. Yours if you want it. Another way to go, and the way I ended up going is to use the NECTO APE100 dry clutch kit. If you go the NECTO route, it all matches up to the Dream 50, except for the right cover. That matches up, but the oil feed for the right end of the crank requires the case be modified. If you're interested, I can describe the needed machine work in detail for you.
Ellis
Hello...
Saturday, September 02, 2017
swingarm collar
COLLAR,RR.FORK Forum Hi, can anyone tell me if swing arm collar 52141333000 has the same dimensions as 52141292000?
Will it fit my '72 CB450K5?
Any help is appreciated.
Cheers
Chris
COLLAR,RR.FORK Forum Hi, can anyone tell me if swing arm collar 52141333000 has the same dimensions as 52141292000?
Will it fit my '72 CB450K5?
Any help is appreciated.
Cheers
Chris
Saturday, September 02, 2017
Motorprobleem
VT1100C SHADOW 1100 1989 US Forum Help, mijn VT 1100 shadow spuwt zijn olie langs de uitlaat naar buiten.
De motor draait al een tijdje niet goed, is beginnen olie verbruiken, rookt bijna niet, dus de olie verbrand...
VT1100C SHADOW 1100 1989 US Forum Help, mijn VT 1100 shadow spuwt zijn olie langs de uitlaat naar buiten.
De motor draait al een tijdje niet goed, is beginnen olie verbruiken, rookt bijna niet, dus de olie verbrand...
Friday, September 01, 2017
Petcock
CL90 SCRAMBLER 90 US Forum Original let fuel pass through in every position...
on Res s. Ordered a replica and same thing
What am I missing?
CL90 SCRAMBLER 90 US Forum Original let fuel pass through in every position...
on Res s. Ordered a replica and same thing
What am I missing?
Friday, September 01, 2017
Oversize piston and rings
VT700C SHADOW 1984 US Forum Hi CMSNL and shadow owners. Been searcing for one year, and ive, found one 0,25 piston sofar and no rings: please help
VT700C SHADOW 1984 US Forum Hi CMSNL and shadow owners. Been searcing for one year, and ive, found one 0,25 piston sofar and no rings: please help
Thursday, August 31, 2017
fits vf 750c magna -83
SOEEDOMETER ASSY Forum fonder,fits the meter hnda magna vf 750c -83
SOEEDOMETER ASSY Forum fonder,fits the meter hnda magna vf 750c -83
Monday, August 28, 2017
Idle Speed Problems
VALVE,FUEL,MAGNET Forum I'm wondering if this might be my problem with not being able to control my idle speed as it seems to be all over the place.
I hoping someone can explain to me exactly what this does...
VALVE,FUEL,MAGNET Forum I'm wondering if this might be my problem with not being able to control my idle speed as it seems to be all over the place.
I hoping someone can explain to me exactly what this does...
Sunday, August 27, 2017
1987 FZ600
COVER. SOCKET Forum Has anybody ordered this item for an 1987 FZ600 Yamaha? If so does it fit ok? Thanking you in advance Andy.
COVER. SOCKET Forum Has anybody ordered this item for an 1987 FZ600 Yamaha? If so does it fit ok? Thanking you in advance Andy.
Sunday, August 27, 2017
Kawasaki Ar50 Key
(27016-5047) LOCK-ASSY,HELMET Forum What is the number of this key?
I am looking for the key with number #506
(27016-5047) LOCK-ASSY,HELMET Forum What is the number of this key?
I am looking for the key with number #506
Saturday, August 26, 2017
Re: Tail light stays on CA95
CA95 BENLY TOURING 150 US Forum
To turn off your motorcycle, the switch needs to be in the next...
CA95 BENLY TOURING 150 US Forum
When i turn the key switch off the low beam on the tail light stays lit.I have a 5 position switch ign switch.
To turn off your motorcycle, the switch needs to be in the next...
Friday, August 25, 2017
honda cz100 monkey bike
CZ100 Forum hi im restoring a 1964 cz100 dose any one know colour code for the scarlet red
CZ100 Forum hi im restoring a 1964 cz100 dose any one know colour code for the scarlet red
Friday, August 25, 2017
more