Nipple, Grease4.5 Cb450k1 1968 Usa

The 9620130000 Nipple, Grease4.5 can be ordered. View linked machines. 96201-30000 is the manufacturercode.

Nipple, Grease4.5 photo
CB450K1 1968 USA NIPPLE, GREASE4.5 9620130000, for Honda
Nipple, Grease4.5 Cb450k1 1968 Usa
fits:
Honda
product number:
9620130000
CMS product number:
HO0127.2729
add to cart
buy later

this product is superseded by 9620130001

description

fits:
Honda
product number:
9620130000
CMS product number:
HO0127.2729
Essential replacement part when rebuilding the linkage on the front fork assembly. It is vital that grease gets to the bearing surfaces unimpeded. Grease nipples can easily become blocked by physical damage or just a little obstinate grit - Either way renewal is the sensible option

  • Don't wait for the bearings to seize before replacing!


  • fits models


    customers also bought

    customer reviews

    write a customer review

    no customer reviews found

    where used

    The Nipple, Grease4.5 appears in these Cb450k1 1968 Usa parts lists:

    Small Image Of Left Crankcase Cover

    Small Image Of Rear Fender   Swingarm

    also in this parts list

    WASHER,PLAIN,6MM | 9410106800
    PIN,LOCK,8MM | 9425108000
    NIPPLE,GREASE4.5 | 9620130001
    WASHER PLAIN 6MM | 9410106080
    SPG-WASHER 10MM | 9411110000
    BALL,STEEL.,10 | 9621110000
    WASHER,PLAIN, 6MM | 9410106000
    WASHER,PLAIN,8MM | 9410108000

    forum

    If you want to discuss this NIPPLE, GREASE4.5, please go the forum and post a message.For questions about Honda Cb450k1 1968 Usa, please write a message in the forum.

    Cb450k1 1968 Usa forum

    posts from the Honda CB450K1 1968 USA forum

    Re: Re: 1970 CB450 Rocker Arm Ratio

    Re: 1970 CB450 Rocker Arm Ratio
    Hello, I drag raced these for a few years in many engine combinations but did not write the de..

    1970 CB450 Rocker Arm Ratio
    I am building a classic racebike from a 1970 CB450 and have a set of aftermarket camshafts where I..

    Re: Mating Kawasaki 400cc and Honda CB 450K1
    Fit a proper racing fuel tap. Check out Motocicle Veloci in Milan, they have a web site and ca..

    Mating Kawasaki 400cc and Honda CB 450K1
    Got a 5 Gal Fiberglass Kawasaki 400cc fuel tank that has a 22mm outlet I have adapted down to a 3/..

    discuss this model

    Nipple, Grease4.5 forum

    Posts from the Honda NIPPLE, GREASE4.5 forum

    discuss this product

    CMS is an independent supplier of spare parts and has no commercial link with Honda, Suzuki, Yamaha or Kawasaki.