Subject: How to check & change the zinger motor oil?
Man i feel like a goof asking you this but anyway how do you know the crank oil is full, is there a drain plug under the motor maybe a bolt on the side case you pull?
I got to take this thing to the car wash, i cant see anything, last but least how much does it hold?
Thanks for your help guys, you put a smile on the boy!! Now i got to fix the brakes have a good weekend!!
Steve
reply
to this
Subject: Re: How to check & change the zinger motor oil?
1) lay down underneath your bike, looking at the drain plug
2) undo the plug
3) time how long it takes for your face to get covered.
4) Multiply that time (seconds) by 4
5) divide that by the grade you would give the extent of your aggrevation at this time
Now you know ABSOLUTELY NOTHING!!
Just kidding, either look for the check glass, cold engine should have half submerged peephole.
Second option is 2nd hand workshop manual, check for max contents, drain crank and then refill with recommended quantity
reply
to this"MVEMJSUNP all planets upto pluto""
Steve Maso
Posts: 5
Posted: Saturday, November 14, 2009 00:24
Subject: Re: Re: How to check & change the zinger motor oil?
1) lay down underneath your bike, looking at the drain plug
2) undo the plug
3) time how long it takes for your face to get covered.
4) Multiply that time (seconds) by 4
5) divide that by the grade you would give the extent of your aggrevation at this time
Now you know ABSOLUTELY NOTHING!!
Just kidding, either look for the check glass, cold engine should have half submerged peephole.
Second option is 2nd hand workshop manual, check for max contents, drain crank and then refill with recommended quantity
Ha Ha Ha!!!! I deserve that for asking you guys that?
I see a round hole, like a glass window should be see threw like other bikes, but it is jet black maybe it has black paint over it? I will look at that now you say this is the way & thank you much! I dont see a drain plug yet, i will look better for one???
This thing smokes like a train, when you open her up and was looking at that oil injector, you have that little screw, then have that 13mm and 15mm screw inside another screw or nut, with a pin in the center of the nut and they are very tight, was afraid of breaking anything? Can you guys tell me how to lean this thing out & whats left hand or right hand thread?
Thank you alot for your help, on this little monster!!!
Steve
reply
to this
