Yamaha How do you adjust the oil injector http://www.cmsnl.com/yamaha-yt60n-tri-zinger-1984-1985_model9067/forum/yamaha-adjust-oil-injector_tid1259/ It seems that it is running way too much oil, how can I properly adjust the injector? Thanks, Scott en-us Sun, 22 Nov 2009 14:57:34 GMT http://www.rssboard.org/rss-specification Mon, 6 Jul 2009 20:23:28 GMT edwin@cmsnl.com http://images.cmsnl.com/img/models/yamaha-yt60n-tri-zinger-1984-1985_medium00009067_36fe.jpg Yamaha YT60N TRI-ZINGER 1984-1985 http://www.cmsnl.com/yamaha-yt60n-tri-zinger-1984-1985_model9067/forum/yamaha-adjust-oil-injector_tid1259/ Alan Green: Re: How do you adjust the oil injector http://www.cmsnl.com/yamaha-yt60n-tri-zinger-1984-1985_model9067/forum/adjust-oil-injector_tid1259/#1299
Check the disc return spring it might need replacement, if the problem persists.
Regards
Alan]]> Mon, 6 Jul 2009 20:23:28 GMT http://www.cmsnl.com/yamaha-yt60n-tri-zinger-1984-1985_model9067/forum/adjust-oil-injector_tid1259/#1299 Scott K: Re: Re: How do you adjust the oil injector http://www.cmsnl.com/yamaha-yt60n-tri-zinger-1984-1985_model9067/forum/adjust-oil-injector_tid1259/#1298
It seems that it is running way too much oil, how can I properly adjust the injector?

Thanks, Scott


Hi Scott, you will find the throttle cable splits in two,follow the cable that runs down to the oil pump, remove the cover over the oil pump, you will see there is a disc with marks on it turn the adjuster screw that holds the cable down until the pin aligns with the pointer on the oil pump. this will lean out your oil mixture.
If you have any other problems, mail me and i will talk you through.

Thanks very much for your response. I did find part of the problem as the disc was sticking and not returning to the idle spot thus pumping extra oil. I cleaned and lubed the disc and it seems much better.

Thanks again, Scott]]> Mon, 6 Jul 2009 19:48:44 GMT http://www.cmsnl.com/yamaha-yt60n-tri-zinger-1984-1985_model9067/forum/adjust-oil-injector_tid1259/#1298 Alan Green: Re: How do you adjust the oil injector http://www.cmsnl.com/yamaha-yt60n-tri-zinger-1984-1985_model9067/forum/adjust-oil-injector_tid1259/#1296 It seems that it is running way too much oil, how can I properly adjust the injector?

Thanks, Scott

Hi Scott, you will find the throttle cable splits in two,follow the cable that runs down to the oil pump, remove the cover over the oil pump, you will see there is a disc with marks on it turn the adjuster screw that holds the cable down until the pin aligns with the pointer on the oil pump. this will lean out your oil mixture.
If you have any other problems, mail me and i will talk you through.]]> Mon, 6 Jul 2009 19:20:02 GMT http://www.cmsnl.com/yamaha-yt60n-tri-zinger-1984-1985_model9067/forum/adjust-oil-injector_tid1259/#1296 Scott K: How do you adjust the oil injector http://www.cmsnl.com/yamaha-yt60n-tri-zinger-1984-1985_model9067/forum/adjust-oil-injector_tid1259/#1259
Thanks, Scott]]> Mon, 22 Jun 2009 23:45:56 GMT http://www.cmsnl.com/yamaha-yt60n-tri-zinger-1984-1985_model9067/forum/adjust-oil-injector_tid1259/#1259