It seems that it is running way too much oil, how can I properly adjust the injector?
Thanks, Scott
Hi Scott, you will find the throttle cable splits in two,follow the cable that runs down to the oil pump, remove the cover over the oil pump, you will see there is a disc with marks on it turn the adjuster screw that holds the cable down until the pin aligns with the pointer on the oil pump. this will lean out your oil mixture.
If you have any other problems, mail me and i will talk you through.
reply
to this
Scott K
Posts: 2
Posted: Monday, July 6, 2009 19:48
Subject: Re: Re: How do you adjust the oil injector
It seems that it is running way too much oil, how can I properly adjust the injector?
Thanks, Scott
Hi Scott, you will find the throttle cable splits in two,follow the cable that runs down to the oil pump, remove the cover over the oil pump, you will see there is a disc with marks on it turn the adjuster screw that holds the cable down until the pin aligns with the pointer on the oil pump. this will lean out your oil mixture.
If you have any other problems, mail me and i will talk you through.
Thanks very much for your response. I did find part of the problem as the disc was sticking and not returning to the idle spot thus pumping extra oil. I cleaned and lubed the disc and it seems much better.
