Oil Pump schematic Yamaha Cw60k 1998
This (3aa1310004) Oil Pump Assy is the most expensive of the items that make up this Oil Pump assembly. The most reasonably priced component used on the Cw60k 1998 Oil Pump is the Screw, Pan Head. The Screw, Pan Head is the most widely applied product in the CW60K 1998 OIL PUMP ( two times ).
Oil Pump schematic
| ref.no. assist me | product assist me | serial numbers assist me | Area assist me | price assist me | quantity assist me | ||
|---|---|---|---|---|---|---|---|
| 1 |
Oil Pump Assy more info > |
€ 107.00
|
|||||
| 2 |
Bolt, Breather more info > |
€ 1.00
|
|||||
| 3 |
Gasket, Breather Bolt more info > |
€ 1.00
|
|||||
| 4 |  |
O-ring more info > |
€ 5.50
|
||||
| 5 |
Gear, Worm Wheel more info > |
€ 7.50
|
|||||
| 6 |
Pin, Dowel more info > |
€ 2.00
|
|||||
| 7 |
Clip more info > |
€ 1.00
|
|||||
| 8 |
Hose (l485) more info > |
€ 3.50
|
|||||
| 9 |  |
Clip (214-13164-00) more info > product number: 9046802033 CLIP (214-13164-00) Using anything other than the correct clip for this oil pipe would risk damage to the hose with the potential for catastrophic oil leakage. If you don't specify genuine Yamaha hose clips anywhere else don't skimp in this vital area! |
€ 2.00
|
||||
| 10 |
Pipe, Oil 2 more info > |
€ 7.50
|
|||||
| 12 |  |
Clip 101235600 more info > product number: 9046708003 CLIP 101235600 Keep this long thin hose firmly attached to the header tank of the cooling system by using only genuine Yamaha spring clips. They are designed to do the job correctly, not to tight to cause the hose to wear through and leak, but tight enough to hold the hose safely in position. |
€ 2.00
|
||||
| 13 |  |
Screw, Pan Head more info > |
€ 0.50
|
||||
| 14 |
Gear, Pump Drive more info > |
€ 8.00
|
|||||
| 15 |
Pin,dowel (603) more info > |
€ 2.00
|
|||||
| 16 |
Circlip(1ey) more info > |
€ 3.00
|
|||||
