Aluminum Swing-arm (8cm Long/std.) Monkey ,gorilla ,baja
ALUMINUM SWING-ARM (8CM LONG/STD.) MONKEY ,GORILLA ,BAJA 0603023, fits Takegawa
: Takegawa
: 06-03-023
: 0603023
Standard type + 8 cm aluminum swing arm for Monkey & Gorilla - Baja (install with 280 mm rear shock absorbers)
This Swingarm has been developed with a view to maximum rigidiy and
endurance. The construction material is lightweight aluminum.
The components have been formed with a strong mow connection to a rigid
frame. The swingarm is NC-machined and by polishing it has got its tight
appearance. It is provided with a chainslider.
This 8cm type swingarm is suitable for 8 inch wheels (standard Monkey or
Baja).
This Swingarm has been developed with a view to maximum rigidiy and
endurance. The construction material is lightweight aluminum.
The components have been formed with a strong mow connection to a rigid
frame. The swingarm is NC-machined and by polishing it has got its tight
appearance. It is provided with a chainslider.
This 8cm type swingarm is suitable for 8 inch wheels (standard Monkey or
Baja).
customers who bought this, also bought
Customers who bought the ALUMINUM SWING-ARM (8CM LONG/STD.) MONKEY ,GORILLA ,BAJA also bought these products:
-
ALUMINUM WHEEL HALF (FOR REAR DRUM BRAKE) MONKEY ?GORILLA 10 I -
LIGHT ASSY.,HEAD -
PIPE,L.STEERING H -
THREAD,HEAD,TOP, -
BALL ASSY.,STEERI -
STROKE UP CRANK SHAFTASSY. R-3B-TYPE 12V MONKEY ?GORILLA (124C -
RACE,STRG.TOP CON -
RACE STRG.BOTTOM -
KEY SET -
NUT,HEX CAP -
UNIT.,TAIL LIGHT -
RACE,STRG.BALL -
FENDER FR*R-4C* -
SPECIAL CLUTCH KIT(ALUNIMUM DIE-CAST) 6/12V-MONKEY (FOR STOCK M -
8 INCH ALUMINUM WHEEL HALF (CHEMICAL POLISH) MONKEY ,GORILLA -
(02-08-0052) KICK STARTER ARM FOR MONKEY (CHROME) -
ALUMINUM FORGED CHANGE PEDAL 12VMONKEY, GORILLA,12V DAX -
SCREW, PILOT -
NUT,U,FLANGE,10MM -
(53110-GFL-J40) PIPE,R.STEERING H -
BOLT,RR.FEND.SET. -
AIR FILTER TYPE-2 (TAPER /49MM) PE28/PWK28 -
LABEL,HELMET HOLD -
DOWN MUFFLER (JMCA) CHROME PLATED MONKEY ?GORILLA (EXCEPT AB27 -
EMBLEM,L SIDE COV -
EMBLEM,R SIDE COV -
GEAR,MAINSHAFT SE -
BRAKE ARM (FOR FRONT DRUM BRAKE ) MONKEY /BAJA?GORILLA -
FENDER,FRON*NH24* -
PL REG NO -
TWO-WAY QUICK BRAKE MASTER CYLINDER MULTIPURPOSE (FOR F22.2 HA -
LABEL,OIL CAP. -
ALUMINUM GENERATOR COVER (WITH BEARING) FOR 12V MONKEY ?GORILL -
EMBLEM,TOP COVER -
BODY, FRONT UPPER 1 -
CRANKCASE COMP.,L -
RUBBER,CUSHION -
PIN,STEP BAR JOIN -
CAM SHAFT (RACING/S35) FOR SUPERHEAD (+R) ONLY (MONKEY) -
WASHER,10MM -
CYLINDER KIT (SCUT/67MM/178CC) KSR110/KLX110 (SUPERHEAD+R)
Aluminum Swing-arm (8cm Long/std.) Monkey ,gorilla ,baja reviews
Reviews for the Takegawa Aluminum Swing-arm (8cm Long/std.) Monkey ,gorilla ,baja
no reviews found
write a review
write a reviewwrite a review for Takegawa Aluminum Swing-arm (8cm Long/std.) Monkey ,gorilla ,baja .
forum
If you want to discuss this ALUMINUM SWING-ARM (8CM LONG/STD.) MONKEY ,GORILLA ,BAJA, please go the forum and post a message.
