Nut.hex 10mm
NUT.HEX 10MM 9403010000, fits Honda
: Honda
: 94030-100-00
: 9403010000
Using as many new fasteners as possible when rebuilding a Honda motorcycle will make the task easier and allow the correct torque to be applied more accurately than reusing old stretched and damaged items!
Specifying only genuine Honda parts is one of the best ways to achieve perfection!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 10mm HEX-NUT.
High performance Honda fasteners for use on high performance Honda's! Use only genuine Honda screws for accurate fitting. Specify ALL the screws required in one order and save money on shipping costs.
Specifying only genuine Honda parts is one of the best ways to achieve perfection!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 10mm HEX-NUT.
customers who bought this, also bought
Customers who bought the NUT.HEX 10MM also bought these products:
-
SPG-WASHER 8MM -
SCREW,PIVOT -
SPG-WASHER 10MM -
WASHER,PLAIN,8MM -
WASHER, MAGNETO -
WASHER,10MM -
WASHER,10MM -
NUT,HEX.,10M/M -
WASHER,SPRING,6MM -
WASHER,SPG 12MM -
(93500-060-200A) SCREW,CROSS 6X20 -
KEY, WOODRUFF -
WASHER,PLAIN,12MM -
DOWEL,PIN,8X14 -
SCREW,CROSS 5X12 -
(92101-060-160A) BOLT,HEX., 6X16 -
RUBBER CUSHION -
(94021-060-20) NUT, BLIND, 6M/M -
WASHER,SPG.,5MM -
O RING 23X2.8 -
DUST-SEAL, BRAKE -
PIN,KNOCK 8X12A -
RUB.,CHANGE PEDAL -
SCREEN, FILTER -
WASHER A, SEALING -
SCREW,STAND PIVOT -
NUT.HEX 12MM -
PIN,LOCK,8MM -
WASHER,PLAIN,5MM -
WASHER,LOCK 14MM -
PACKING, DRAIN -
OIL SEAL, 34559 -
(91317-171-003) O-RING (6X1.7) -
WASHER, SEALING -
MARK, CAUTION -
CUSHION,A.RRFENDE -
O RING, 30.8M/M -
NUT, FLANG, 10MM
Nut.hex 10mm reviews
Reviews for the Honda Nut.hex 10mm
no reviews found
forum
If you want to discuss this NUT.HEX 10MM, please go the forum and post a message.
