Front Fork schematic Honda Xrv650 Africa Twin 1989 Switzerland / Hsq

Fitting new fork tube slider bushes whilst overhauling your front forks, will as part of an overall renewal strategy of replacing all the critical bushes, restore the precision of your forks and tighten up the damping. This by allowing the correct flow of fork oil through the damping holes, and not bypassing worn out bushes.
For other parts you will need for your front fork refurbishment browse our online catalogue for your model, and buy your Honda parts from the experts, using our user friendly online purchasing system, backed up by sharp prices and low price shipping costs.

Important cir-clip that partly helps secure the slider onto the fork tube and also keeps the oil seal in position.

Specify GENUINE HONDA fork oil seals and you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of oil seal may be just as good, or they may not!
If you don't wish to go to the trouble of dropping the fork leg assemblies twice in a relatively short time, then fitting these genuine Honda items would be the sensible course of action for long term results!

Genuine Honda fork boot will deliver fit, finish and long term durability, and they are not even expensive - Don't spoil them by using a hose clip from your local hardware store! Specify this genuine Honda fixing clip for an original appearance and long term durability.

Reusing the old socket bolt is simply not worth the risk! The old item may have been stretched and have possible thread damage - Either way they will be difficult to torque up properly!

Not just any old nut, a genuine Honda nut! Precisely engineered to do the exact job it was designed for - Without compromise!

Your overhaul will be easier to execute and with a more professional outcome when you specify new genuine Honda SEALING WASHERS.
Sealing washers are a use once item, like a plastic O-ring, they spread when torque is applied to the bolt or nut, but unlike plastic O-rings they stay deformed as they are designed to do so cannot always be reused successfully.
For other new parts to make your task easier and with better results check out our on-line schematic for your model.

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the originals!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 6 x 25 EXHAUST FLANGE STUD BOLT.