Handle Switch 85-87 schematic Honda Xr600r 1987 Usa

A sticking throttle can be dangerous, especially at speed!(technically it is not the speed that is dangerous, it is the sudden stop from speed that hurts!)
If the cable is frayed and worn, then renewal will not only be the safe option it will also smooth up the action allowing a more progressive throttle response, and of course less chance of complete failure.
You may wish to consider this:

17920MK2670

A sticking throttle can be dangerous, especially at speed!(technically it is not the speed that is dangerous, it is the sudden stop from speed that hurts!)
If the cable is frayed and worn, then renewal will not only be the safe option it will also smooth up the action allowing a more progressive throttle response, and of course less chance of complete failure.
You may wish to consider this:

17910MK2670

Using the correct genuine Honda pat in every aspect of your restoration or general service, will result in a bike that looks exactly as the factory made it (well after a ground up restoration anyway!)
To make sure you use only the correct Honda parts for all the jobs you carry out on your machine, try browsing the online catalogue for your model? Sometimes just a few Euros spent here and there can add hundreds to the sales value!

Genuine Honda replacement throttle tube that is the simplest remedy for one that is damaged or just worn out!
We recommend fitting a new throttle cable at the same time for the best results (genuine Honda preferably!). And why not finish the item off nicely with a new grip.

No matter how carefully you handle your Honda, this rubber grip will still degrade over the years with UV exposure and wear and tear.
Fresh new looking rubber parts like these speak volumes for the image of your bike, and the owner's attention to detail!
This is the Left-hand grip. To match this up with the right grip please add
to your order
To check many other detail items that could add the finishing touch to your Honda, check out the 'gallery', and where applicable the online 'parts list' fiche for your model

Refurbishing the handlebar control assembly is easier and less expensive when new parts are used.
This clutch-lever bracket is a prime example where the cost of replacement would be less than refurbishment!
While these are still available there seems little point in reusing the old parts!
You may also be interested in these related items

53171429770
53173376000

If replacing the lever bracket holder itself then this part to go with it, will ensure that the finish and appearance remain consistent and of equal high quality.

Genuine Honda cable adjuster that is priced low enough to allow the old item to be junked. These have a tough life and renewing them is just so much easier and more cost effective

Renewing your control levers is easier and less expensive than trying to restore the old bent and scraped items; that is a simple fact of life! Renewing this PIVOT-BOLT at the same time will make sure the fulcrum is back to factory fresh tolerances!
For many other low priced parts that are easier replaced than repaired, browse the on-line Gallery and schematic for your model, and enjoy a user friendly on-line Honda shopping parts experience!

For safety and the correct appearance this genuine Honda cable adjuster nut fits the bill and will help ensure accurate adjustment and smooth operation.
You may like to buy the adjustment bolt to go with this nut:

53192KA4710

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
This is the 4 x 12 CROSS-HEAD SCREW(A).

Using as many new fasteners as possible when rebuilding a Honda motorcycle (any Motorcycle actually!) will make the task easier and allow the correct torque to be applied more accurately than reusing old stretched and damaged items! Specifying only genuine Honda parts is just the best way to achieve perfection!
You may wish to view these other related parts:

90107KF0000
90304GE8003
9390425280
964001004007
960010604000

Given the choice between an old corroded fastener, and a new, nicely plated part, what would you use in the overhaul of your Honda!
Well if we assume correctly, you might like to see all the other new bolts, screws, nuts and washers that will help you achieve a thorough and professional job - Check out the schematic for your model!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 5mm FLANGE-NUT.