Gasket Kit B schematic Honda Vfr750f 1992 France / Yb

We strongly recommend this gasket be renewed every time you remove and replace this item.
For all your consumables, gaskets and seals, check out the online catalogue for your Honda, this will help ensure you don't forget one of those silly little parts, that you find missing when you are halfway through the job in hand!

Replace these sealing washers whenever the feed pipe is removed and refitted with genuine Honda items of course!
Another similar item you may be interested in viewing:

90428PD6003

These superb Honda engines deserve nothing less than top quality genuine Honda O-RING SEALS Cheaper pattern copies may look O.K - But can let down an otherwise great engine build!
This is the 21.5 x 3.2 O-RING.
Other O-RING seals you may wish to consider:

91306KK4003
91302MB0013
9460830000

Renewing O-RINGS when they have to be removed and replaced, will make doubly sure the seal is maintained. The old one may seem O.K, but heat and pressure after tightening, will make them brittle and hard.
To help you order the correct quantity and type of seals, gaskets and other consumables, why not check our on-line schematic, or if your machine is not supported this way, simply browse the on-line Gallery; this which will list everything you need for a successful overhaul.
This is the 48.1 x 3.6 O-RING.

Seals, gaskets and other consumables, why not check our on-line schematic, or if your machine is not supported this way, simply browse the on-line Gallery; this will list everything you need for a successful overhaul.
This is the 14.6 x 3.6 O-RING.
Other O-RINGS you may require:

91309MJ0005
91302KF0003

Specifying only genuine Honda O-RINGS, GASKETS and SEALS means buying parts made in Japan to Honda quality control standards - components that were deemed good enough by the factory when the machine rolled off the production line.
This is the 7.7 x 2.3 O-RING.

Specifying only genuine Honda GASKETS will ensure the cooling system will remain free of leaks.
This is the WATER PIPE SEAL B.
Other coolant system gaskets and seals you may wish to consider:

91301MB0000
91315ME9003

Renewing O-RINGS when they have to be removed and replaced, will make doubly sure the seal is maintained. The old one may seem O.K, but heat and pressure after tightening, will make them brittle and hard.
To help you order the correct quantity and type of seals, gaskets and other consumables, why not check our on-line schematic, or if your machine is not supported this way, simply browse the on-line Gallery; this which will list everything you need for a successful overhaul.
This is the 21.2 x 2.4 O-RING.

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 12 DRAIN PLUG WASHER.