Rear Brake Caliper schematic Honda Vf1100c V65 Magna 1983 Usa

The Rear Brake Caliper assembly is constructed from several parts from which the Caliper Assy.,rr. is the most expensive. The Pad,comp (ask) Rr is the most widely applied product in the VF1100C V65 MAGNA 1983 USA REAR BRAKE CALIPER ( two times ). Some items from this specific schematic: Bracket Comp.,rr., Caliper Comp.,rr., Dust Seal, Seal,piston.

find your parts in the schematic below

Rear Brake Caliper schematic


big image of Rear Brake Caliper schematic
 
add selected to cart
ref.no.
assist me
  product
assist me
serial numbers
assist me
Area
assist me
price
assist me
quantity
assist me
0 Set Brake Pad Set Brake Pad
more info >

product number: 431a0mb4306




SET BRAKE PAD
this product is no longer available, however you can add it to your watch list

€ 54.50


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
0 Set Brake Pad
more info >

product number: 431a0mb4307



this product is no longer available, however you can add it to your watch list

€ 54.50


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
1 Caliper Assy.,rr.
more info >

product number: 43100mb4007



this product is no longer available, however you can add it to your watch list

€ 559.50


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
1 Caliper Assy.,rr.
more info >

product number: 43100mb4008



this product is no longer available, however you can add it to your watch list

€ 559.50


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
2 Caliper Comp.,rr.
more info >

product number: 43101mb4006



this product is no longer available, however you can add it to your watch list

€ 178.50


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
3 Pad comp ask Rr Pad,comp (ask) Rr
more info >

product number: 43105mb4017




PAD,COMP (ASK) RR

There are many different makes of brake disc pads that will fit your Honda, but by and large, fitting genuine Honda pads will take away the doubt of fitting non-standard parts, and give the performance and durability you come to expect from Honda ownership.
For all your Honda consumable requirements try browsing the online 'parts list' fiche or catalogue for your model

add to cart
click to view the product page
€ 28.00

4 Spring,pad
more info >

product number: 43108mb9781



this product is no longer available, however you can add it to your watch list

€ 5.00


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
5 Bracket Comp.,rr.
more info >

product number: 43110mb4006



this product is no longer available, however you can add it to your watch list

€ 115.50


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
6 Retainer rear Retainer,rear
more info >

product number: 43112445631




RETAINER,REAR

It makes good practical sense to renew this item as a matter of safety when giving your braking system a makeover.
The more parts that are renewed in the calliper the more reliable the outcome, and the time saved by not trying to salvage the unsalvageable can be best spent on other areas of machine maintenance - Or down the Pub!

  • Renewing this item will save time and provide a safer braking system!
  • Are there any other parts that may be better being renewed than repaired in your calliper.

  • add to cart
    click to view the product page
    € 5.00

    7 Screw  Bleeder Screw, Bleeder
    more info >

    product number: 43352568003



    starstarstarstarstar

    SCREW, BLEEDER

    The position of this bleed nipple renders it prone to damage road salt damage, corrosion and of course damage from heavy handling! Easiest option for allowing easy brake bleeding, and of course just looking better when in position on the caliper, is replacement, with a new genuine Honda part, naturally!
    For the other Honda brake parts you may need, try browsing the online catalogue for your model?

    add to cart
    click to view the product page
    € 5.00

    8 Cap bleeder Cap,bleeder
    more info >

    product number: 43353461771




    CAP,BLEEDER

    If you have lost your old cap, or it has just deteriorated with age and UV exposure, you will be glad you fitted a new one when you have to bleed the system next time! No debris or grit messing up the job!
    For other braking area consumables and spares, try browsing the online catalogue for your model?

    add to cart
    click to view the product page
    € 3.50

    9 Arm,rr.brk.stop
    more info >

    product number: 43431mb4000



    this product is no longer available, however you can add it to your watch list

    € 30.50


    Product is not available, add it to the watch list and receive a notification if it becomes available again.
    assist me
    10 Collar link Collar,link
    more info >

    product number: 43435392000




    COLLAR,LINK

    This link has to have the minimum of free play to be effective; renewing this collar will take up the slack that the old worn item may be causing.

  • Always use a new location bolt when renewing this collar 90124392000

  • add to cart
    click to view the product page
    € 5.50

    11 Piston Piston
    more info >

    product number: 45107ma3006




    PISTON

    Renewing the piston will only work so long as the rest of your braking system is up to scratch! So check all you're various bits and pieces, seals, diaphragm, brake lines etc, and if you have any doubts, the wise move would be complete replacement of any suspect parts.
    You might like to see what other customers bought who ordered this piston, at the bottom of this web page?

    add to cart
    click to view the product page
    € 24.50

    12 Dust Seal Dust Seal
    more info >

    product number: 45109166006



    starstarstarstarstar

    DUST SEAL

    Service replacement part, essential to renew whenever the brakes are being serviced.
    For all the consumables for your brake overhaul, check out the online catalogue for your model. This should help ensure you order ALL the parts you need, saving money in shipping costs, and time wasted in your garage or work shop, when you are missing a vital part!

    add to cart
    click to view the product page
    € 3.50

    13 Sleeve Sleeve
    more info >

    product number: 45111ma3006



    starstarstarstarstar

    SLEEVE

    This is a wear item, and replacement when the sleeve starts to develop loose play is essential.
    For all the consumables and wear item replacements for your brake overhaul, check out the online catalogue for your model. This should help ensure you order ALL the parts you need, saving money in shipping costs, and time wasted in your garage or work shop, when you are missing a vital part!

    add to cart
    click to view the product page
    € 8.00

    14 Pin bolt Pin,bolt
    more info >

    product number: 45131ma3006




    PIN,BOLT

    This bolt usually has a petty tough time of things, ending up with damaged threads, the bolt can becoming bent or broken. Thankfully it is inexpensive to replace, and to keep a spare in your toolbox, just in case!
    To assist in locating all the parts and consumables you need for this area of refurbishment or servicing, browse our online catalogue or where applicable the online 'parts list' fiche for your model, and order through our class leading online purchase system, supported by friendly and knowledgeable staff.

    add to cart
    click to view the product page
    € 9.00

    15 Boot B Boot B
    more info >

    product number: 45133ma3006



    starstarstarstarstar

    BOOT B

    No matter how you look after your Honda, this protective boot has a finite life span, if it does not suffer physical damage, temperature extremes and UV exposure will cause it to degrade!
    Replacing this item at the first signs of wear and tear will save a lot more time and money if you have to replace the part it is there to protect!
    To access the list of all the parts you need to complete your brake rejuvenation project, take a look at our online 'parts list' fiche for your particular model, and help ensure you specify everything you need in one shipment?

    add to cart
    click to view the product page
    € 3.50

    16 Boot pin Boot,pin
    more info >

    product number: 45133166016




    BOOT,PIN

    If you are about to renew your pin bolt, it is quite likely that the old boot has deteriorated and perished, letting in the elements rather than keeping them out.
    To protect your pin bolt, make sure this item is replaced with a new part, with a little grease inside to keep everything in order.
    To assist you in specifying an order that has all the parts you need in one hit, check out the online catalogue for your model, and enjoy our class leading online purchasing system, backed up with low prices and good service.

    add to cart
    click to view the product page
    € 2.00

    17 Seal piston Seal,piston
    more info >

    product number: 45209166006




    SEAL,PISTON

    Sometimes, bleeding your brake system with a new piston seal may be all that is required to restore the brakes back to normal. If you are already committed to fitting a new piston, then the seal has to be replaced as a matter of course.
    For all your essential braking consumables and parts, browse the online catalogue for your model, this should help you order everything you need, and take better advantage of our already low shipping costs!

    add to cart
    click to view the product page
    € 3.50

    18 Pin hanger Pin,hanger
    more info >

    product number: 45215ma2006




    PIN,HANGER

    If you are renewing or generally overhauling your brakes, then replacing the old corroded or damaged hanger pin would ease the fitting process, and just look so much more professional when completed!
    So before ordering a new hanger pin, try browsing the online catalogue, or where applicable our famous online 'parts list' fiche to judge for yourself the other new bolts, seals and general brake parts you may require for a job, when completed, you an feel proud of!

    add to cart
    click to view the product page
    € 7.00

    19 Plate Plate
    more info >

    product number: 45217ma3006



    starstarstarstarstar

    PLATE

    It makes good practical sense to renew this item as a matter of safety when giving your braking system a makeover. The more parts that are renewed in the calliper the more reliable the outcome, and the time saved by not trying to salvage the unsalvageable can be best spent on other areas of your machine maintenance....or down the Pub!

  • Renewing this item will save time and provide a safer braking system
  • Are there any other parts that may be better being renewed than repaired in your calliper?
  • add to cart
    click to view the product page
    € 3.00

    20 Bolt stopper Arm Bolt,stopper Arm
    more info >

    product number: 90124392000




    BOLT,STOPPER ARM

    This link has to have the minimum of free play to be effective; renewing this bolt will take up the slack that the old worn item may be causing.

  • Always use a new location collar when renewing this bolt 43435392000

  • add to cart
    click to view the product page
    € 4.00

    21 Bolt,flange 8x49
    more info >

    product number: 90180ma3006



    this product is superseded by 90180MN8006

    This is a wear item, and replacement of this and the sleeve when loose play starts to develop is essential.
    For all the consumables and wear item replacements for your brake overhaul, check out the on-line schematic for your model.
    This should help ensure you order ALL the parts you need, saving money in shipping costs and time wasted in your garage or work shop, when you are missing a vital part!

  • Order ALL the braking components required at the same time and save money on shipping costs!
  • Please make sure that the part numbers you order are compatible with your model.

  • add to cart
    click to view the product page
    € 2.50

    22 Nut castle 8mm Nut,castle,8mm
    more info >

    product number: 94011080000s




    NUT,CASTLE,8MM

    The importance of using the correct, genuine Honda fasteners in all areas of the machine can never be overstated!
    Threads will be accurate, bolts will be hardened and tempered correctly with the correct plated finish - In short it would be unwise, to say the least, to use anything other than genuine Honda fasteners!
    We recommend that where applicable when using new nuts, new bolts/studs are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
    This is the 8mm CASTLE-NUT - Don't forget to renew the split-pin!

  • Please make sure part numbers ordered are compatible with your model.
  • Honda parts frequently great value ALWAYS great quality.
  • Use genuine Honda fasteners - Why take the chance with any other make!

  • add to cart
    click to view the product page
    € 1.00

    24 Washer  Flat  8 Mm Washer, Flat, 8 Mm
    more info >

    product number: 9410108000




    WASHER, FLAT, 8 MM

    We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
    So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
    Here are just a few suggestions of other possible related fastener parts you may wish to order:

    90512300000
    9410106000
    94001080000S
    9200006020
    9200006016
    9400106000
    9411106000
    9200006012
    9200006028

  • Please make sure part numbers ordered are compatible with your model.
  • At CMS we are Honda enthusiasts in particular and Japanese bike enthusiasts in general, so hopefully understand our customer expectations!

  • add to cart
    click to view the product page
    € 0.50

    25 Pin  Cotter  2 0x15 Pin, Cotter, 2.0x15
    more info >

    product number: 9420120150




    PIN, COTTER, 2.0X15

    Specify GENUINE HONDA fasteners including these spit, cotter and lock pins, you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of pin may be just as good, or they may not!
    This is the 2.0 x 15 COTTER PIN.

  • Always replace the washer that relates to this pin at the same time when applicable.
  • Honda parts frequently great value ALWAYS great quality.
  • Use genuine Honda fasteners - Why take the chance with any other make!

  • add to cart
    click to view the product page
    € 0.50

    26 Bolt,flange,6x10
    more info >

    product number: 957000601007



    this product is superseded by 957010601007

    Given the choice between an old corroded bolt, and a new, nicely plated part, what would you use in the overhaul of your Honda!
    Well if we assume correctly, you might like to see all the other new bolts and screws that will help you achieve a thorough and professional job - Check out the schematic for your model!
    This is the 6 x 10 FLANGE BOLT.

  • Make sure you order ALL the parts required at the same time and save money on our already low shipping costs!
  • Achieving Honda perfection is easier and less expensive when buying from CMS!

  • add to cart
    click to view the product page
    € 1.00

    26 Bolt flange 6x10 Bolt,flange,6x10
    more info >

    product number: 957010601007




    BOLT,FLANGE,6X10

    Given the choice between an old corroded bolt, and a new, nicely plated part, what would you use in the overhaul of your Honda!
    Well if we assume correctly, you might like to see all the other new bolts and screws that will help you achieve a thorough and professional job - Check out the schematic for your model!
    This is the 6 x 10 FLANGE BOLT.

  • Make sure you order ALL the parts required at the same time and save money on our already low shipping costs!
  • Achieving Honda perfection is easier and less expensive when buying from CMS!

  • add to cart
    click to view the product page
    € 1.00

     
    add selected to cart

    top of page

    Honda Vf1100c V65 Magna 1983 Usa

    Honda VF1100C V65 MAGNA 1983 USA


    Introduced in 1984 this 100bhp ‘ 8500rpm liquid cooled V4 cruiser used a carden shaft drive with a five speed box. The styling , slightly awkward by today’s cruiser standards did not stop this selling in bucket loads, with the power in abundance and a lovely V4 engine note all... Read more

     
    you have selected:
    REAR BRAKE CALIPER schematic Honda VF1100C V65 MAGNA 1983 USA REAR BRAKE CALIPER
    Back to all schematics
    direct
    part
    search
    you are here: » home » Honda » Motorcycles » VF1100 » VF1100C V65 MAGNA 1983 USA » parts list » REAR BRAKE CALIPER