Right Crankcase Cover schematic Honda Trx250x Fourtrax 250x 1992 Usa

Renewing the gaskets and seals with genuine Honda items will ensure they fit absolutely correctly, no pulling, pushing or distortion. Just place on, tighten up the fasteners, genuine Honda ones hopefully, and that's it!

Genuine Honda parts are usually the most cost effective, especially oil filters, for your peace of mind as much as your wallet! If Honda used them when the machine was new, why change a successful formula. As our American friends sometimes say, 'if it ain't broke, don't fix it'!
Before placing your order, please check our online catalogue covering your particular model of Honda, you may find parts there that you never even new you needed!

Check this part carefully when renewing the oil filter, if it has degraded or in any way become damaged, replacement with a new part is advisable. For such a low price why not jut renew it anyway?

Specifying only genuine Honda bearings when re-building the engine unit will mean using the same items used by the Honda factory. Why risk any other make of bearing with something as important as the engine?
You may require other bearings for the re-build? Check out:
91022MG2791
91005MK4701
91005MK4701
91001MK2003

Essential replacement part when re-assembling any engine. The importance of renewing the oil seals with genuine Honda items can never be overstated!
This is the 14 x 22 x 5 OIL SEAL
Other oil seals that may be required, please always check the part numbers are compatible with your application:

91204KK0003
91204KE8003

These superb Honda's deserve nothing less than top quality genuine Honda oil seals and dust covers Cheaper pattern copies may look O.K, but can let down an otherwise great rebuild!
This is the 12 x 22 x 5 OIL SEAL
Other seals you may require to complete the rebuild:

91211KA3761
91203KK3830

Specifying only genuine Honda oil seals will ensure the item being refurbished will remain oil tight and, importantly, no contamination enters the oil/lubrication system or bearings.
This is the 20 x 85 x 5 OIL SEAL
Other oil seals you may require:

91201951003
91201KA4004
91203023020
91203023020

Specifying only genuine Honda oil, dust and O-RING seals means buying seals made in Japan to Honda quality control standards - Seals that were deemed good enough by the factory when the machine rolled off the production line.
This is the 54 x 2.4 O-RING. You may also require this related seal:

91305KF0003

Specify only genuine Honda screws,bots,nuts and washers and use exactly the same parts as the Honda factory professionals. It really does not get any better than that!
This is the 4mm NUT.
We recommend that when using new nuts, new bolts are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!

Specify GENUINE HONDA fasteners including these precision engineered DOWEL and LOCK PINS and you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Reusing the old items is not advisable!
This is the 8 x 14 DOWEL PIN.

This 10MM CIRCLIP has a number of applications - Whatever your use for this item you can be sure that because it is a genuine Honda part it will be well up to the job and probably better than a none Honda item!

Specify new genuine Honda bolts and know that they will fit exactly like the originals, will look exactly like the originals (when they were new at least!) and will last like the originals! In fact we cannot think of any reason to buy any other type, especially some of the dubious pattern copies available elsewhere!
This is the 6 x 12 FLANGE BOLT.

Specify new genuine Honda bolts and know that they will fit exactly like the originals, will look exactly like the originals (when they were new at least!) and will last like the originals! In fact we cannot think of any reason to buy any other type, especially some of the dubious pattern copies available elsewhere!
This is the 6 x 28 FLANGE BOLT.

If damaged, or even if the appearance of this bolt is less than perfect, at this low price a new GENUINE HONDA part is just a mouse click away!
You may like view these other related fasteners but please make sure that the bolts you order are compatible with your model:

90005GHB610
960010606000
960010606500
960010607000
960010605000
90082KFL850
960010603200
960010602000