Carburetor (3) schematic Honda S800 Convertible

The FLOAT CHAMBER is one of many critical exterior corrosion and interior varnishing prone items in the carburettor. Renewing this along with a new float set, main jet, needle jet and slow running jet will help restore the carburettor back to full performance and economy - check the schematic to see exactly which parts you should order.

This part should be replaced as an overhaul strategy with other wear items in the carburettor/s.

These are items that do wear in time, almost imperceptibly at first, but the deterioration will get worse, with lower performance and difficult starting. If in doubt, replace them!
We can also supply the other items you may need to complete your carburettor rebuild - check both the online 'Gallery' for your classic Honda S800, and the online schematic where you can find all the items with their respective part numbers. This will aid you in locating the correct items for this superb classic!

Superb quality and good value - what else is there to say, well nothing really, the image speaks for itself!

CMS - The easy way to purchase ALL your Japanese motor related parts online. Ask a member of our staff, if you are new to this kind of shopping, to help guide you through our user-friendly system.

When refurbishing the carburettor it would be a sensible precaution to renew this THROTTLE SPRING along with the float, and other jets to ensure that the carburettor can give top performance. Renewing one without the other is not a recipe for good carburettor efficiency!

Reusing the old screws is simply not worth the unsightly results! The old items may be corroded and have possible thread or head damage - Either way they will be difficult to tighten up properly!
This is the 5 x 16 CROSS-HEAD SCREW(A).

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
This is the 4 x 10 CROSS-HEAD SCREW(A)

Your overhaul will be easier to execute and with a more professional outcome when you specify new genuine Honda parts like this 4mm PLAIN WASHER rather than making do with the old corroded, maybe slightly damaged item!
For other new parts to make your task easier and with better results check out the on-line schematic for your model.