Dynamo Cover - A.c. Generator schematic Honda S110 Benly (general Export Type 3)

Ensure this classic 'Step Through' receives its ignition spark at the correct moment, by fitting a new genuine Honda contact breaker assembly. If still running the original assembly it is likely to be worn, affecting the ignition timing and giving generally poorer performance

Renewing this part when replacing your contact breaker points will help prolong the life and performance of those new points.
If you are overhauling your ignition system, make sure you order ALL the items you require these can be seen on the schematic for your model.

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
This is the 4 x 8 CROSS-HEAD SCREW(A)

Given the choice between an old corroded screw, and a new, nicely plated part, what would you use in the overhaul of your Honda!
Well if we assume correctly, you might like to see all the other new bolts and screws that will help you achieve a thorough and professional job - Check out the schematic for your model!
This is the 6 x 65 PAN-HEAD SCREW.

Using as many new fasteners as possible when rebuilding a Honda motorcycle will make the task easier and allow the correct torque to be applied more accurately than reusing old stretched and damaged items!
Specifying only genuine Honda parts is one of the best ways to achieve perfection!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 10mm HEX-NUT.

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 4mm SPRING WASHER.