Rear Wheel (gl1500j/k) schematic Honda Gl1500 Goldwing 1989 Sweden / Kph

Genuine Honda COLLAR that is priced low enough to allow the old items to be junked. These have a tough life and renewing them is just so much easier and more cost effective.

Before ordering your new AXLE DISTANCE COLLAR, take a look at all the other Honda parts we supply to assist you in achieving a perfect engine or complete motorcycle restoration. Whatever your requirements, gaskets, valves, pistons, clutch plates, if it is a Honda part, we will probably have it!

This part should be replaced whenever a new tyre is fitted. Why not buy a couple of spares to keep safely in your garage for future use, you can never know when you may need one replacing!
To access more useful parts that will come in useful now or in the future, check out the online catalogue and where applicable the online 'parts list' fiche for your model.

Any machine is only as good as the quality of the bearings it runs on. Honda motorcycles are no different!
Ordering only genuine Honda bearings will give the peace of mind that is part and parcel of seeing the 'Honda' name on the packaging. In short buying the best and most suitable replacements as fitted originally by the Honda factory.

Seals, gaskets and other consumables, why not check our on-line schematic, or if your machine is not supported this way, simply browse the on-line Gallery; this will list everything you need for a successful overhaul.
This is the 61.2 x 2.0 O-RING mainly used on the cylinder base application.

High performance machinery needs high performance genuine Honda O-RINGS - Nothing more to say!
This is the 50.5 x 3.5 O-RING
Anther O-RING you may require:

91356MG9003