Rear Brake Caliper schematic Honda Gl1200i Gold Wing Aspencade 1984 Usa

The Rear Brake Caliper assembly is constructed from several parts from which the (43100-mg9-037) Caliper Assy,rr is the most expensive. In this schematic the "(43105-mg9-017) Pad Comp,rr" is used most often. This schematic depicts all components used in the Gl1200i Gold Wing Aspencade 1984 Usa Rear Brake Caliper partslist.

find your parts in the schematic below

Rear Brake Caliper schematic


big image of Rear Brake Caliper schematic
 
add selected to cart
ref.no.
assist me
  product
assist me
serial numbers
assist me
Area
assist me
price
assist me
quantity
assist me
0 Set,brk Pad
more info >
  € 73.00

0 Set Brake Pad
more info >

product number: 431a0mg9007



this product is superseded by 06435MG9405

add to cart
click to view the product page
  € 73.00

1 Collar,rr Side
more info >

product number: 42313mg9000



this product is no longer available, however you can add it to your watch list

  € 7.00


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
2 Caliper Assy,rr
more info >

product number: 43100mg9007



this product is no longer available, however you can add it to your watch list

  € 367.50


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
3 Caliper Body.,rr
more info >

product number: 43101mg9006



this product is no longer available, however you can add it to your watch list

  € 178.50


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
4 43105-mg9-017 Pad Comp rr Pad Comp,rr
more info >

product number: 43105mg9007




(43105-MG9-017) PAD COMP,RR
this product is superseded by 43105MG9017

add to cart
click to view the product page
  € 28.00

4 Pad Comp  ask R Pad Comp.,(ask) R
more info >

product number: 43105mg9017




PAD COMP.,(ASK) R

add to cart
click to view the product page
  € 28.00

5 Piston Piston
more info >

product number: 43107ma7006



starstarstarstarstar

PISTON

Fitting a new piston during the course of a brake overhaul will help ensure full power is restored to the hydraulic activation of your brake calipers.
It is surprising how much power is lost through this item becoming worn over the years of hard use.
For all your genuine Honda consumables, check out the online catalogue for your model.

add to cart
click to view the product page
  € 24.00

6 Brkt Comp,rr
more info >

product number: 43110mg9006



this product is no longer available, however you can add it to your watch list

  € 129.00


Product is not available, add it to the watch list and receive a notification if it becomes available again.
assist me
7 Retainer rear Retainer,rear
more info >

product number: 43112445631




RETAINER,REAR

It makes good practical sense to renew this item as a matter of safety when giving your braking system a makeover.
The more parts that are renewed in the calliper the more reliable the outcome, and the time saved by not trying to salvage the unsalvageable can be best spent on other areas of machine maintenance - Or down the Pub!

  • Renewing this item will save time and provide a safer braking system!
  • Are there any other parts that may be better being renewed than repaired in your calliper.

  • add to cart
    click to view the product page
      € 5.00

    8 Cover,rr.disk
    more info >

    product number: 43140mg9000



    this product is no longer available, however you can add it to your watch list

      € 16.50


    Product is not available, add it to the watch list and receive a notification if it becomes available again.
    assist me
    9 Screw  Bleeder Screw, Bleeder
    more info >

    product number: 43352568003



    starstarstarstarstar

    SCREW, BLEEDER

    The position of this bleed nipple renders it prone to damage road salt damage, corrosion and of course damage from heavy handling! Easiest option for allowing easy brake bleeding, and of course just looking better when in position on the caliper, is replacement, with a new genuine Honda part, naturally!
    For the other Honda brake parts you may need, try browsing the online catalogue for your model?

    add to cart
    click to view the product page
      € 5.00

    10 Cap bleeder Cap,bleeder
    more info >

    product number: 43353461771




    CAP,BLEEDER

    If you have lost your old cap, or it has just deteriorated with age and UV exposure, you will be glad you fitted a new one when you have to bleed the system next time! No debris or grit messing up the job!
    For other braking area consumables and spares, try browsing the online catalogue for your model?

    add to cart
    click to view the product page
      € 3.50

    11 Spring pad Spring,pad
    more info >

    product number: 45108ma2006




    SPRING,PAD

    This item should be considered a service replacement part, essential to renew whenever the brakes are being serviced. They have a tough life and can suffer stress cracking and loss of temper, rather like the rest of mankind then!
    For all the consumables required for a thorough brake overhaul, check out the on-line schematic for your model.

  • For other brake consumables, shims, seals and pistons browse the Gallery or schematic and make sure your order contains all the parts you need in one shipment!
  • CMS. Your one stop on-line Honda parts shop!

  • add to cart
    click to view the product page
      € 7.00

    12 Dust Seal Dust Seal
    more info >

    product number: 45109ma7006




    DUST SEAL

    Service replacement part, essential to renew whenever the brakes are being serviced.
    To help you decide on which parts you need to order during the course of overhauling your brakes, take a look at the online 'parts list' fiche, and assemble a more complete order, to take better advantage of your already low shipping costs!

    add to cart
    click to view the product page
      € 3.00

    13 Sleeve Sleeve
    more info >

    product number: 45111ma3006



    starstarstarstarstar

    SLEEVE

    This is a wear item, and replacement when the sleeve starts to develop loose play is essential.
    For all the consumables and wear item replacements for your brake overhaul, check out the online catalogue for your model. This should help ensure you order ALL the parts you need, saving money in shipping costs, and time wasted in your garage or work shop, when you are missing a vital part!

    add to cart
    click to view the product page
      € 8.00

    14 Pin bolt Pin,bolt
    more info >

    product number: 45131ma3006




    PIN,BOLT

    This bolt usually has a petty tough time of things, ending up with damaged threads, the bolt can becoming bent or broken. Thankfully it is inexpensive to replace, and to keep a spare in your toolbox, just in case!
    To assist in locating all the parts and consumables you need for this area of refurbishment or servicing, browse our online catalogue or where applicable the online 'parts list' fiche for your model, and order through our class leading online purchase system, supported by friendly and knowledgeable staff.

    add to cart
    click to view the product page
      € 9.00

    15 Boot B Boot B
    more info >

    product number: 45133ma3006



    starstarstarstarstar

    BOOT B

    No matter how you look after your Honda, this protective boot has a finite life span, if it does not suffer physical damage, temperature extremes and UV exposure will cause it to degrade!
    Replacing this item at the first signs of wear and tear will save a lot more time and money if you have to replace the part it is there to protect!
    To access the list of all the parts you need to complete your brake rejuvenation project, take a look at our online 'parts list' fiche for your particular model, and help ensure you specify everything you need in one shipment?

    add to cart
    click to view the product page
      € 3.50

    16 Boot pin Boot,pin
    more info >

    product number: 45133166016




    BOOT,PIN

    If you are about to renew your pin bolt, it is quite likely that the old boot has deteriorated and perished, letting in the elements rather than keeping them out.
    To protect your pin bolt, make sure this item is replaced with a new part, with a little grease inside to keep everything in order.
    To assist you in specifying an order that has all the parts you need in one hit, check out the online catalogue for your model, and enjoy our class leading online purchasing system, backed up with low prices and good service.

    add to cart
    click to view the product page
      € 2.00

    17 Seal piston Seal,piston
    more info >

    product number: 45209ma7006




    SEAL,PISTON

    Renewing this seal should be part and parcel of any brake service or overhaul; its importance cannot be over emphasized!
    To assist you in putting together a more comprehensive order for ALL the parts you need for your brake service, check out the online 'parts list' fiche or catalogue for your model, and have all the parts you need in one shipment, saving time and money later!

    add to cart
    click to view the product page
      € 3.00

    18 Pin hanger Pin,hanger
    more info >

    product number: 45215ma2006




    PIN,HANGER

    If you are renewing or generally overhauling your brakes, then replacing the old corroded or damaged hanger pin would ease the fitting process, and just look so much more professional when completed!
    So before ordering a new hanger pin, try browsing the online catalogue, or where applicable our famous online 'parts list' fiche to judge for yourself the other new bolts, seals and general brake parts you may require for a job, when completed, you an feel proud of!

    add to cart
    click to view the product page
      € 7.00

    19 Plate Plate
    more info >

    product number: 45217ma3006



    starstarstarstarstar

    PLATE

    It makes good practical sense to renew this item as a matter of safety when giving your braking system a makeover. The more parts that are renewed in the calliper the more reliable the outcome, and the time saved by not trying to salvage the unsalvageable can be best spent on other areas of your machine maintenance....or down the Pub!

  • Renewing this item will save time and provide a safer braking system
  • Are there any other parts that may be better being renewed than repaired in your calliper?
  • add to cart
    click to view the product page
      € 3.00

    20 Bolt,flange 8x49
    more info >

    product number: 90180ma3006



    this product is superseded by 90180MN8006

    This is a wear item, and replacement of this and the sleeve when loose play starts to develop is essential.
    For all the consumables and wear item replacements for your brake overhaul, check out the on-line schematic for your model.
    This should help ensure you order ALL the parts you need, saving money in shipping costs and time wasted in your garage or work shop, when you are missing a vital part!

  • Order ALL the braking components required at the same time and save money on shipping costs!
  • Please make sure that the part numbers you order are compatible with your model.

  • add to cart
    click to view the product page
      € 2.50

    21 Bolt,flange,6x10
    more info >

    product number: 957000601007



    this product is superseded by 957010601007

    Given the choice between an old corroded bolt, and a new, nicely plated part, what would you use in the overhaul of your Honda!
    Well if we assume correctly, you might like to see all the other new bolts and screws that will help you achieve a thorough and professional job - Check out the schematic for your model!
    This is the 6 x 10 FLANGE BOLT.

  • Make sure you order ALL the parts required at the same time and save money on our already low shipping costs!
  • Achieving Honda perfection is easier and less expensive when buying from CMS!

  • add to cart
    click to view the product page
      € 1.00

    21 Bolt flange 6x10 Bolt,flange,6x10
    more info >

    product number: 957010601007




    BOLT,FLANGE,6X10

    Given the choice between an old corroded bolt, and a new, nicely plated part, what would you use in the overhaul of your Honda!
    Well if we assume correctly, you might like to see all the other new bolts and screws that will help you achieve a thorough and professional job - Check out the schematic for your model!
    This is the 6 x 10 FLANGE BOLT.

  • Make sure you order ALL the parts required at the same time and save money on our already low shipping costs!
  • Achieving Honda perfection is easier and less expensive when buying from CMS!

  • add to cart
    click to view the product page
      € 1.00

    22 Bolt,flg.16x20
    more info >

    product number: 960000602007



    this product is superseded by 960010602007

    Specify new genuine Honda bolts and know that they will fit exactly like the originals, will look exactly like the originals (when they were new at least!) and will last like the originals! In fact we cannot think of any reason to buy any other type, especially some of the dubious pattern copies available elsewhere!
    This is the 6X SH FLANGE BOLT.

  • Fit new nuts where applicable - Avoid old and possibly damaged threads spoiling the new!
  • New bolts just look better than using the old items!
  • CMS Your one stop on-line Honda parts supplier giving competitive prices and quick delivery, wherever you are!

  • add to cart
    click to view the product page
      € 1.00

    22 Bolt flange Sh 6x Bolt,flange Sh 6x
    more info >

    product number: 960010602007




    BOLT,FLANGE SH 6X

    Specify new genuine Honda bolts and know that they will fit exactly like the originals, will look exactly like the originals (when they were new at least!) and will last like the originals! In fact we cannot think of any reason to buy any other type, especially some of the dubious pattern copies available elsewhere!
    This is the 6X SH FLANGE BOLT.

  • Fit new nuts where applicable - Avoid old and possibly damaged threads spoiling the new!
  • New bolts just look better than using the old items!
  • CMS Your one stop on-line Honda parts supplier giving competitive prices and quick delivery, wherever you are!

  • add to cart
    click to view the product page
      € 1.00

     
    add selected to cart

    top of page

    Honda Gl1200i Gold Wing Aspencade 1984 Usa

    Honda GL1200I GOLD WING ASPENCADE 1984 USA


    The GL1200 arrived for the 1984 model year and continued the trend set by it's predecessor. There was the un-faired Standard, the dressed Interstate and the top of the range Aspencade, which had the Type 3 audio system. New, stiffer frame with major improvements, bigger and more responsive 1182cc version... Read more

     
    you have selected:
    REAR BRAKE CALIPER schematic Honda GL1200I GOLD WING ASPENCADE 1984 USA REAR BRAKE CALIPER
    Back to all schematics
    direct
    part
    search
    you are here: » home » Honda » Motorcycles » GL1200 GOLDWING » GL1200I GOLD WING ASPENCADE 1984 USA » parts list » REAR BRAKE CALIPER