Cylinder Head/cylinder schematic Honda Cr500r 1993 Canada

Pictures, as always, speak louder than words - so all we have to say about this part is this; could you re-finish your old corroded and partially damaged item for the low price we are asking for this WATER HOSE JOINT - we think not!

If you run or are restoring one of these superb machines then you will already be aware of just how scarce parts are becoming for these beguiling models - that said if you wish to order this REED VALVE, order sooner rather than later.

The CARBURETTOR INSULATOR needs to be in good condition with no damage, especially on the inner face where gas flow is so vital for top performance. They degrade with temperature extremes and vibration over time - renewal is often the only way to ensure that minimal amounts of heat and vibration reach the carburettor.

One of those seals that are better used only once! If the system is removed and re-fitted then this seal should be replaced as a matter of course

Like so many seals this is a use once only item. Once removed it should be replaced with new!

The importance of using the correct, genuine Honda fasteners in all areas of the machine can never be overstated!
Threads will be accurate, bolts will be hardened and tempered correctly with the correct plated finish - In short it would be unwise, to say the least, to use anything other than genuine Honda fasteners!

A new genuine Honda DRAIN PACKING WASHER is a guarantee the correct grade of materials used in the manufacturing process.
These washers are a use once item, like a plastic O-ring, they spread when torque is applied to the bolt or nut, but unlike plastic O-rings they stay deformed as they are designed to do so cannot be reused successfully.
For other new parts to make your task easier and with better results check out our on-line schematic for your model.

Given the choice between an old corroded fastener, and a new, nicely plated part, what would you use in the overhaul of your Honda!
Well if we assume correctly, you might like to see all the other new bolts, screws, nuts and washers that will help you achieve a thorough and professional job - Check out the schematic for your model!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 8mm FLANGE-NUT.

All dowel pins should be renewed after being removed to ensure good accurate location. Accurate machining is of paramount importance so ensure you specify only Honda dowels which are manufactured to very close tolerances and correctly heat treated.
You may wish to add this related item to your order:

91103429000

If damaged, or even if the appearance of this bolt is less than perfect, at this low price a new GENUINE HONDA part is just a mouse click away!
You may like view these other related fasteners but please make sure that the bolts you order are compatible with your model:

90005GHB610
960010606000
960010606500
960010604000
960010607000
960010605000
90082KFL850
960010603200