Crankcase schematic Honda Cb750p7 (general Export Type 6 Kph)

This part usually has a hard life, the head gets damaged, the thread gets crossed, so for just a few euro's, why not simply replace it!
You may like to browse the 'Product Gallery' covering your particular machine, just to make sure there are not more items you may have overlooked when placing your order.

Fitting a new breather tube? Don't spoil the appearance for the sake of a new retaining clip.

Specify GENUINE HONDA fasteners and you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of bolt may be just as good, or they may not!
This is the 6 x 25 BOLT-WASHER.

Reusing the old bolt is simply not worth the risk! The old item may have been stretched and have possible thread damage - Either way they will be difficult to torque up properly!
This is the M8 x 120 HEX BOLT(H).

The importance of using the correct, genuine Honda fasteners in all areas of the machine can never be overstated - This 14mm WASHER is no exception!
The correct material with the correct plated finish - In short it would be unwise, to say the least, to use anything other than genuine Honda fasteners!

Seals, gaskets and other consumables, why not check our on-line schematic, or if your machine is not supported this way, simply browse the on-line Gallery; this which will list everything you need for a successful overhaul.
This is the 11 x 2.5 O-RING.
Other O-RINGS you may require:

91301426010
91304286000
91302001020
91318ME5003
91319323000

Specifying only genuine Honda O-ring seals will ensure the item being refurbished will remain oil tight and, importantly, no contamination enters the inner workings!
This is the 19.4 x 2.8 O-RING
Other O-RINGS you may wish to consider:

91255312003
91255413881
91302001020
91309300000
91319323000

Specify GENUINE HONDA fasteners and you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of bolt may be just as good, or they may not!
This is the 6 x 25 BOLT-WASHER.

Your overhaul will be easier to execute and with a more professional outcome when you specify new genuine Honda parts like this 10mm FLANGE-NUT rather than making do with the old corroded, maybe slightly damaged item!
For other new parts to make your task easier and with better results check out our on-line schematic for your model.
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!

Specify GENUINE HONDA fasteners including these precision engineered DOWEL and LOCK PINS and you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Reusing the old items is not advisable!
This is the 10 x 16 DOWEL PIN.

Not just any bolt, a genuine Honda bolt! Precisely engineered to the exact job it was designed for without compromise.
This particular bolt is the 6 x 40 FLANGE BOLT.

Not just any bolt, a genuine Honda bolt! Precisely engineered to the exact job it was designed for without compromise.
This particular bolt is the 6 x 55 FLANGE BOLT.

Whilst fasteners can be supplied from many sources, buying only genuine Honda parts will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the 6 x 100 FLANGE BOLT.