Headlight (e,ed,f,g) schematic Honda Cb750kz 1979 Four (england)

Compliment your new or refurbished headlight with a nice new plated screw, and don't for get to put a little grease on the thread before inserting, this will both protect and allow smooth accurate adjustment.
For all your Honda nuts and bolts requirements, check out the online catalogue and 'parts list' fiche for your model. All our Honda fasteners are genuine factory parts, so will fit and locate perfectly every time!

Compliment your new or refurbished headlight with a nice new plated screw adjustment assembly, and don't for get to put a little grease on the thread before inserting, this will both protect the thread from corrosion and allow smooth accurate adjustment.

You might consider keeping a couple of these little fasteners as a spares back up in your nuts and bolts jar, left in there Honda plastic bag, so you know what they are. You might also like to order 33125292670 to go with this nut?
You know how annoying it is to lose a screw like this, and then wait to have a new one delivered, the delivery cost being as much as the item itself!
To make up a comprehensive order of useful Honda fasteners, check out the online 'parts list' fiche for your model?

It is easier to renew this SOCKET than to repair, solder and re-crimp - not much more we can say about this item, other than it is a new genuine Honda part with all the quality the name Honda rightly implies!

The bright colour and general finish on these very visible parts deteriorates over the years with U.V exposure and general road grime. You hardly even notice until you fit a new one.
For many other cosmetic replacement parts for your bike, why not check out the online catalogue covering your model?

After years of temperature extremes and general wear and tear, this item rarely comes out of its housing without partially breaking up!
So, easy solution buy a new one or two to keep in your garage or workshop!
For other useful items like this, why not browse our on-line Gallery or schematic for your model, you may find all kinds of parts you need that you had no idea you ever wanted!

Buying a new headlight bulb has never been easier. Well when you buy on line from CMS anyway!
You will receive new genuine Honda parts that are correct for your model, and probably cost less than the non-genuine parts you may have bought from your local garage, that may or may not be the correct wattage.

So much costlier to replace light bulbs because the anti vibration rubber has degraded beyond its useful life - If in doubt, replace these items with new!
You may wish to consider this part as well: 90151422000

Specify new genuine Honda CROSS HEAD SCREWS and know that they will fit exactly like the originals, will look exactly like the originals (when they were new at least!) and will last like the originals! In fact we cannot think of any reason to buy any other type, especially some of the dubious pattern copies available elsewhere!
This is the 3 x 8 CROSS-HEAD SCREW(A).

Reusing the old screws is simply not worth the unsightly results! The old items may be corroded and have possible thread or head damage - Either way they will be difficult to tighten up properly!
This is the 5 x 16 CROSS-HEAD SCREW(B).

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original - In this case this item should be replaced as a matter of course!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 5mm SPRING WASHER.

Given the choice between an old corroded bolt, and a new, nicely plated part, what would you use in the overhaul of your Honda!
Well if we assume correctly, you might like to see all the other new bolts and screws that will help you achieve a thorough and professional job - Check out the schematic for your model!
This is the 6 x 10 FLANGE BOLT.