Cylinder - Piston schematic Honda Cb750k0 Four (netherlands)

Using genuine Honda gaskets will give reliability as well as peace of mind. Your CB750 deserves only the best……….doesn't it?

Vital rubber seal between cylinder head and barrel, should be replaced as a matter of course when head is removed and replaced. Fits many types of Honda, so please check the model application kit carefully before ordering, and of course make sure your order the right quantity, for example 4 required for Honda CB175 twin.

Keep the engine of your Honda in tip-top condition, especially if it is a little tired, with a slight smoke haze when accelerating. Fitting new genuine Honda piston rings can restore your engine's performance and bring down the oil consumption.
Please check model application list carefully, as not all CB750SOHC models used the same piston ring part number.

When you see the official Honda name and number on the packaging, you know you are fitting the best parts to your Honda 'CB Four'.
The piston, piston rings, piston pin and piston pin retaining clip are some of the most important parts in your engine, stopping oil smoke, maintaining compression and power. You could possibly buy cheaper items from Far Eastern manufacturers - but would you want to take that chance - unlikely!
Similar items you may wish to consider:

13041300014
13041300024

Pistons have the hardest of jobs, temperature ranges from sub zero to 700 degrees plus!
Valves sometimes impact them; rings gummed up, carbon deposits spoiling the profile, gudgeon pin seizing up in its journal. No wonder they sometimes need replacing! So when your CB750 KO up to K6 model needs a new, or a complete set of new pistons, make sure they are genuine Honda.
Before placing your order, please check the model application list carefully.

A new genuine Honda piston set could bring your CB750 KO up to K6 model back to life, full performance with negligible oil consumption.
Please check model application list carefully to ensure the correct part number is specified.

The piston is the lungs of the engine; it is what delivers the reciprocal power before being turned into rotating power.
If the piston is not right the rest of the engine will not give its best - Choosing genuine Honda pistons will ensure that you are giving your engine the best possible chance to deliver maximum performance and reliability. Would you want anything less! Retain this vital part correctly by specifying these new PISTON PIN CLIPS.

Seals, gaskets and other consumables, why not check our on-line schematic, or if your machine is not supported this way, simply browse the on-line Gallery; this which will list everything you need for a successful overhaul.
This is the 61.8 x 2.0 O-RING.
Other O-RINGS you may require:

91301426010
91310426000
91302001020
91318ME5003
91319323000

Specify GENUINE HONDA fasteners including these precision engineered DOWEL and LOCK PINS and you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Reusing the old items is not advisable!
This is the 12 x 22 KNOCK PIN.