Frame schematic Honda Gl1000 Ltd Gold Wing Ltd Usa

Superb new replacement part that helps retain the originality of your classic. Also useful for it's original intended job, somewhere to hang your hat, or dog lead, or……..well whatever!
Please check the model application list below to ensure compatibility with your model?
To access the largest stock of new and NOS classic Honda parts in Europe, try browsing our online catalogue for your model?
We hope you will find our online purchasing system to be an easy and pleasant shopping experience, where you can enjoy competitive pricing and a prompt shipping service.

Superb new replacement part that helps retain the originality of your classic. Also useful for it's original intended job, somewhere to hang your hat, or dog lead, or……..well whatever!
Please check the model application list below to ensure compatibility with your model?
To access the largest stock of new and NOS classic Honda parts in Europe, try browsing our online catalogue for your model?
We hope you will find our online purchasing system to be an easy and pleasant shopping experience, where you can enjoy competitive pricing and a prompt shipping service.

Whilst fasteners can be supplied from many sources, buying only genuine Honda parts will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the HEX HEAD 8 x 20 BOLT.

Whilst fasteners can be supplied from many sources, buying only genuine Honda parts will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the HEX HEAD 8 x 20 BOLT.

Given the choice between an old corroded fastener, and a new, nicely plated part, what would you use in the overhaul of your Honda!
Well if we assume correctly, you might like to see all the other new bolts, screws, nuts and washers that will help you achieve a thorough and professional job - Check out the schematic for your model!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 8mm FLANGE-NUT.

The importance of using the correct, genuine Honda fasteners in all areas of the machine can never be overstated!
Threads will be accurate,screws will be hardened and tempered correctly with the correct plated finish - In short it would be unwise, to say the least, to use anything other than genuine Honda fasteners!
This is the 6 x 12 PAN-HEAD SCREW(A)

The importance of using the correct, genuine Honda fasteners in all areas of the machine can never be overstated!
Threads will be accurate,screws will be hardened and tempered correctly with the correct plated finish - In short it would be unwise, to say the least, to use anything other than genuine Honda fasteners!
This is the 6 x 12 PAN-HEAD SCREW(A)

Using as many new fasteners as possible when rebuilding a Honda motorcycle will make the task easier and allow the correct torque to be applied more accurately than reusing old stretched and damaged items!
Specifying only genuine Honda parts is one of the best ways to achieve perfection!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 10mm HEX CAP-NUT - Don't forget to order a new 10mm washer to compliment this!

Using as many new fasteners as possible when rebuilding a Honda motorcycle will make the task easier and allow the correct torque to be applied more accurately than reusing old stretched and damaged items!
Specifying only genuine Honda parts is one of the best ways to achieve perfection!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 10mm HEX CAP-NUT - Don't forget to order a new 10mm washer to compliment this!

Given the choice between an old corroded bolt, and a new, nicely plated part, what would you use in the overhaul of your Honda!
Well if we assume correctly, you might like to see all the other new bolts and screws that will help you achieve a thorough and professional job - Check out the schematic for your model!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 12mm HEX-NUT.

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
94001080000S
9410108000
9200006020
9200006016
9400106000
9411106000
9200006012
9200006028

Whilst fasteners and washers can be supplied from many sources, buying only genuine Honda parts will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the 10mm WASHER.

Whilst fasteners and washers can be supplied from many sources, buying only genuine Honda parts will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the 10mm WASHER.

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original - In this case this item should be replaced as a matter of course!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 8mm SPRING WASHER.

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original - In this case this item should be replaced as a matter of course!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 10mm SPRING WASHER.

Specify GENUINE HONDA fasteners and you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of washer may be just as good, or they may not!
This is the 12mm SPRING WASHER.

Using the correct genuine Honda pat in every aspect of your restoration or general service, will result in a bike that looks exactly as the factory made it (well after a ground up restoration anyway!)
To make sure you use only the correct Honda parts for all the jobs you carry out on your machine, try browsing the online catalogue for your model? Sometimes just a few Euros spent here and there can add hundreds to the sales value!

Your overhaul will be easier to execute and with a more professional outcome when you specify new genuine Honda parts like this 6 x 12 FLANGE BOLT rather than making do with the old corroded, maybe slightly damaged item!
For other new parts to make your task easier and with better results check out our on-line schematic for your model.

Your overhaul will be easier to execute and with a more professional outcome when you specify new genuine Honda parts like this 6 x 12 FLANGE BOLT rather than making do with the old corroded, maybe slightly damaged item!
For other new parts to make your task easier and with better results check out our on-line schematic for your model.

Your overhaul will be easier to execute and with a more professional outcome when you specify new genuine Honda parts like this 6 x 12 FLANGE BOLT rather than making do with the old corroded, maybe slightly damaged item!
For other new parts to make your task easier and with better results check out our on-line schematic for your model.

Whilst fasteners can be supplied from many sources, buying only genuine Honda parts will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the 8 x 14 FLANGE BOLT.

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 8 x 40 FLANGE BOLT.