Forums

On this page you find the latest topics from the forums from this website. When you want to view the complete thread of a forum, simply click the corresponding link below.


disponibilite  
SPG,LEVER RETURN Forum Bonjoue le produit est dispo?
Friday, February 03, 2017 

lock assy 3711010820 
(37110-10840) LOCK ASSY, STEERING S Forum is dit conktaktslot met sleutels
Thursday, February 02, 2017 

Re: LIGHTING  
CZ100 Forum
Can anyone help me with how to get the front headlight and tail light working on my Honda CZ 100 bike. What powers the lights?

Hi Lance, I can help as I am restoring my own CZ100...
Thursday, February 02, 2017 

Re: Enquiry 
CZ100 Forum
Hi. Does anyone know of a CZ100 for sale at the moment, or better still does anyone know the whereabouts' of CZ100 436 WHN. Thanks Tom.

Hi Tom, I will have my CZ100 1965 for sale...
Thursday, February 02, 2017 

Type 
MUFFLER COMP.,EX. Forum Is this exhaust the exact same as in photo
I thought the early ones had two tabs that mount to frame and engine
thanks
Tuesday, January 31, 2017 

Re: Re: How can I identify the right bearings crankshaft? 
(13318-425-003) BEARING D CRANK Forum
I have the owners workshop manual with the big end bearing as well main bearings Metal Selection Tables. On the other hand I know that is usually possible to identify the size of the bearing by the colour code on the end surface.

However is not possible to see any colour on the old bearing even after cleaning them.

I just could identify on the connecting rod a G (one G in each one connecting rod). So I cannot understand how can I identify the right Big-end bearing shells.

In the Cranhshaft I could identify five letters (AAAAB) and four numbers (3333) and in the Crankcase five letters (AAAAA).I really appreciate if someone could please tell me what Crankshaft bearing shells would be appropriete in this case.

Thanks a lot for your support.

Jose Seno
Tuesday, January 31, 2017 

Re: How can I identify the right bearings crankshaft? 
(13318-425-003) BEARING D CRANK Forum
I have the owners workshop manual with the big end bearing as well main bearings Metal Selection Tables. On the other hand I know that is usually possible to identify the size of the bearing by the colour code on the end surface.

However is not possible to see any colour on the old bearing even after cleaning them.

I just could identify on the connecting rod a G (one G in each one connecting rod). So I cannot understand how can I identify the right Big-end bearing shells.

In the Cranhshaft I could identify five letters (AAAAB) and four numbers (3333) and in the Crankcase five letters (AAAAA).I really appreciate if someone could please tell me what Crankshaft bearing shells would be appropriete in this case.

Thanks a lot for your support.

Jose Seno
Tuesday, January 31, 2017 

Re: How can I identify the right bearings crankshaft? 
(13318-425-003) BEARING D CRANK Forum
I have the owners workshop manual with the big end bearing as well main bearings Metal Selection Tables. On the other hand I know that is usually possible to identify the size of the bearing by the colour code on the end surface.

However is not possible to see any colour on the old bearing even after cleaning them.

I just could identify on the connecting rod a G (one G in each one connecting rod). So I cannot understand how can I identify the right Big-end bearing shells.

In the Cranhshaft I could identify five letters (AAAAB) and four numbers (3333) and in the Crankcase five letters (AAAAA).I really appreciate if someone could please tell me what Crankshaft bearing shells would be appropriete in this case.

Thanks a lot for your support.

Jose Seno
Tuesday, January 31, 2017 

Re: quantity 
PISTON RING SET (STD) Forum
Is this set for one piston or four

Strange question as only 3 Cylinder
Did you ever get an answer as I need some also ??
Monday, January 30, 2017 

tune fault 
RM85 ,L (USA) Forum Hi guys i have a 2007 rm 85 that seems to be running too rich through all mid range i have replaced all engine seals,reeds, piston and ring,
has standard jetting 125 main and 50 slow...
Monday, January 30, 2017 

honda ez 90 
EZ90 '96 US Forum I find body parts for honda cub ez 90 does anyone know where to find them new?
Saturday, January 28, 2017 

ZL1000 Petcock 
TAP-ASSY,FUEL Forum Hi,
Does anyone know if this petcock for a ZG1000 would fit a ZL1000A1 1987? If so, is the flow rate similar?
Many thanks,
Nick
Saturday, January 28, 2017 

Re: Enquiry 
CZ100 Forum
Hi. Does anyone know of a CZ100 for sale at the moment, or better still does anyone know the whereabouts' of CZ100 436 WHN. Thanks Tom.



Hello
2 white tanks here 1963 fore...
Thursday, January 26, 2017 

Re: HONDA MTX 200 R119 
LABEL,FR.*TYPE B* Forum Thank you so much! Such an honor! Thanks for having this site. Professionally i am a rider ,so i like your article.I am planning a trip to Kerala with my bike.There is so many Kerala...
Wednesday, January 25, 2017 

Re: Side stand for a 1965 CB72 + fixings 
CB72 (GENERAL EXPORT) Forum Yaa you are right.These model have no side stand.The side stand is includes in extra fitting section.I am working in ,and i am a professional rider.I suggest this website for all my...
Wednesday, January 25, 2017 

Re: honda cb125 c93 informations 
CB125 - CB93 (General export model) Forum Thank you for your post.I am regular user of Honda.Most of my products are manufactured by Honda like car ,bike etc.I use slideway lubricants for my all machines for make us powerful....
Wednesday, January 25, 2017 

Re: Nice! 
REAR FLASHER LAMP ASSY (NON O.E. ALTERNATIVE) Forum Thank you for your great article.As a rider this article is really fantastic for me.I think so many riders searching for this topic.This type of bike parts are available.But so many...
Wednesday, January 25, 2017 

pulse generator 30300 MBT F21 
GENERATOR ASSY., PUL Forum hi is the pulse generator 30300MBTF21 replaced by 30300MBTF20. does i work on a varadero 2005 bike. I'm having a problem with the hiss light staying ON and the bike not starting but cranking.
Wednesday, January 25, 2017 

Fitment 
BOLT, BREATHER Forum Can anyone tell me what bike this fits?
Thanks!
Tuesday, January 24, 2017 

INFO 
(90401-10172) BOLT. UNION(3GM) Forum Please i need to know the size of this bolt to know if is ok for my bike
Monday, January 23, 2017 

On this section

you are here: » home » community » forums » page 6