Forums

On this page you find the latest topics from the forums from this website. When you want to view the complete thread of a forum, simply click the corresponding link below.


Re: Re: How can I identify the right bearings crankshaft? 
(13318-425-003) BEARING D CRANK Forum
I have the owners workshop manual with the big end bearing as well main bearings Metal Selection Tables. On the other hand I know that is usually possible to identify the size of the bearing by the colour code on the end surface.

However is not possible to see any colour on the old bearing even after cleaning them.

I just could identify on the connecting rod a G (one G in each one connecting rod). So I cannot understand how can I identify the right Big-end bearing shells.

In the Cranhshaft I could identify five letters (AAAAB) and four numbers (3333) and in the Crankcase five letters (AAAAA).I really appreciate if someone could please tell me what Crankshaft bearing shells would be appropriete in this case.

Thanks a lot for your support.

Jose Seno
Tuesday, January 31, 2017 

Re: How can I identify the right bearings crankshaft? 
(13318-425-003) BEARING D CRANK Forum
I have the owners workshop manual with the big end bearing as well main bearings Metal Selection Tables. On the other hand I know that is usually possible to identify the size of the bearing by the colour code on the end surface.

However is not possible to see any colour on the old bearing even after cleaning them.

I just could identify on the connecting rod a G (one G in each one connecting rod). So I cannot understand how can I identify the right Big-end bearing shells.

In the Cranhshaft I could identify five letters (AAAAB) and four numbers (3333) and in the Crankcase five letters (AAAAA).I really appreciate if someone could please tell me what Crankshaft bearing shells would be appropriete in this case.

Thanks a lot for your support.

Jose Seno
Tuesday, January 31, 2017 

Re: How can I identify the right bearings crankshaft? 
(13318-425-003) BEARING D CRANK Forum
I have the owners workshop manual with the big end bearing as well main bearings Metal Selection Tables. On the other hand I know that is usually possible to identify the size of the bearing by the colour code on the end surface.

However is not possible to see any colour on the old bearing even after cleaning them.

I just could identify on the connecting rod a G (one G in each one connecting rod). So I cannot understand how can I identify the right Big-end bearing shells.

In the Cranhshaft I could identify five letters (AAAAB) and four numbers (3333) and in the Crankcase five letters (AAAAA).I really appreciate if someone could please tell me what Crankshaft bearing shells would be appropriete in this case.

Thanks a lot for your support.

Jose Seno
Tuesday, January 31, 2017 

Re: quantity 
PISTON RING SET (STD) Forum
Is this set for one piston or four

Strange question as only 3 Cylinder
Did you ever get an answer as I need some also ??
Monday, January 30, 2017 

tune fault 
RM85 ,L (USA) Forum Hi guys i have a 2007 rm 85 that seems to be running too rich through all mid range i have replaced all engine seals,reeds, piston and ring,
has standard jetting 125 main and 50 slow...
Monday, January 30, 2017 

honda ez 90 
EZ90 '96 US Forum I find body parts for honda cub ez 90 does anyone know where to find them new?
Saturday, January 28, 2017 

ZL1000 Petcock 
TAP-ASSY,FUEL Forum Hi,
Does anyone know if this petcock for a ZG1000 would fit a ZL1000A1 1987? If so, is the flow rate similar?
Many thanks,
Nick
Saturday, January 28, 2017 

Re: Enquiry 
CZ100 Forum
Hi. Does anyone know of a CZ100 for sale at the moment, or better still does anyone know the whereabouts' of CZ100 436 WHN. Thanks Tom.



Hello
2 white tanks here 1963 fore...
Thursday, January 26, 2017 

Re: HONDA MTX 200 R119 
LABEL,FR.*TYPE B* Forum Thank you so much! Such an honor! Thanks for having this site. Professionally i am a rider ,so i like your article.I am planning a trip to Kerala with my bike.There is so many Kerala...
Wednesday, January 25, 2017 

Re: Side stand for a 1965 CB72 + fixings 
CB72 (GENERAL EXPORT) Forum Yaa you are right.These model have no side stand.The side stand is includes in extra fitting section.I am working in ,and i am a professional rider.I suggest this website for all my...
Wednesday, January 25, 2017 

Re: honda cb125 c93 informations 
CB125 - CB93 (General export model) Forum Thank you for your post.I am regular user of Honda.Most of my products are manufactured by Honda like car ,bike etc.I use slideway lubricants for my all machines for make us powerful....
Wednesday, January 25, 2017 

Re: Nice! 
REAR FLASHER LAMP ASSY (NON O.E. ALTERNATIVE) Forum Thank you for your great article.As a rider this article is really fantastic for me.I think so many riders searching for this topic.This type of bike parts are available.But so many...
Wednesday, January 25, 2017 

pulse generator 30300 MBT F21 
GENERATOR ASSY., PUL Forum hi is the pulse generator 30300MBTF21 replaced by 30300MBTF20. does i work on a varadero 2005 bike. I'm having a problem with the hiss light staying ON and the bike not starting but cranking.
Wednesday, January 25, 2017 

Fitment 
BOLT, BREATHER Forum Can anyone tell me what bike this fits?
Thanks!
Tuesday, January 24, 2017 

INFO 
(90401-10172) BOLT. UNION(3GM) Forum Please i need to know the size of this bolt to know if is ok for my bike
Monday, January 23, 2017 

INFO 
GASKET(3AJ) Forum HELLO, I NEED TO KNOW THE SIZE OF THIS GASKET. yOU CAN GIVE ME THIS INFORMATION?
Monday, January 23, 2017 

Cowling  
BODY ASSY,COWLING (WHITE/BLUE) Forum What cowling parts does this include? I am looking for middle and lower right side.
Please let me know.
Thanks
Monday, January 23, 2017 

restrictor 
INSULATOR COMP,CA Forum is this insulator a restrictor, which mean than the bike only have 48 hp??
Br Christian
Sunday, January 22, 2017 

Honda Benly C92? 
1983 KZ750-L3 Forum Hi,


I just found a motorcycle for sale, without any papers. The shop who sells it also could not tell me what it was exactly, but said it is from the 50's and it is 125 CC....
Sunday, January 22, 2017 

piston rings 
1983 KZ750-L3 Forum fitting new rings, as far as I can tell the pistons are standard
and the only marks I can find are the letter "N" on the piston rings. could anyone confirm this as standard before...
Saturday, January 21, 2017 

On this section

you are here: » home » community » forums » page 3