Forums

On this page you find the latest topics from the forums from this website. When you want to view the complete thread of a forum, simply click the corresponding link below.


Re: Crankcase assy 
CRANKCASE,ASSY Forum Hi, what do you mean with this? have you clicked the picture and enlarged it so you can have a count
Wednesday, March 28, 2007 

Re: Piston/Cylinder 
PISTON KIT (0.50) *REPRO* Forum Hi, well that really depends on the diameter of your barrel, can you post this?
Wednesday, March 28, 2007 

Re: seat cover 500k1- 550k0 
(77201-323-030AP) CB500K, SEAT COVER *REPRODUCTION* Forum Hi, the 550 seat is different to the 500, there are many pictures to be seen of the 500 seat. I dont think it can be used on the 550.
Wednesday, March 28, 2007 

Re: Carb. back together? 
(16022-230-004) VALVE,THROTTLE Forum did you check the exploded view for this item, in most cases this explains a lot!
Wednesday, March 28, 2007 

Re: PERIFILE!?? 
SEAT ASSY. (REPRO) Forum Hi, what do you mean with perifile?
Wednesday, March 28, 2007 

Carb. back together? 
(16022-230-004) VALVE,THROTTLE Forum How does this carb work? Can't figure out How does the throttle cable raise the throttle valve? The Carb, Cab#1 [with hook connect to and HOW??? Thanks
Wednesday, March 28, 2007 

PERIFILE!?? 
SEAT ASSY. (REPRO) Forum In the original seat there's also a alluminium perfile? Why there is not?
Tuesday, March 27, 2007 

Re: Re: Re: TOP END KIT SUITABILITY 
TOP END KIT ALLOY 47MM, O.T. 6 VOLT 70 SUPERHEAD HEAD & RACE CA Forum
Does anyone know if this will be suitable for fitting on a 1976 ss50?? Is there anything else I will need?

Thanks
Jim


Hi Jim, if your engine is still original and is the 6 volt type ss50 engine then this will fit.

Mike


Got everything fitted except the cover for the cylinder head. I have a selection of them but none seem to fit the head. can you tell me the part that I need to order.

Howdy, this would be the one #12331GB2710

Many thanks

jim
Monday, March 26, 2007 

Re: Re: TOP END KIT SUITABILITY 
TOP END KIT ALLOY 47MM, O.T. 6 VOLT 70 SUPERHEAD HEAD & RACE CA Forum
Does anyone know if this will be suitable for fitting on a 1976 ss50?? Is there anything else I will need?

Thanks
Jim


Hi Jim, if your engine is still original and is the 6 volt type ss50 engine then this will fit.

Mike


Got everything fitted except the cover for the cylinder head....
Sunday, March 25, 2007 

seat cover 500k1- 550k0 
(77201-323-030AP) CB500K, SEAT COVER *REPRODUCTION* Forum Does the seat cover from the CB500K1-2, fit on the CB 550 K0,and are Pattern the same as the one on the Pictures of the complet seat
Thursday, March 22, 2007 

Re: DIFFUSER,EXHAUST  
DIFFUSER,EXHAUST Forum
let me know the shipping rate to Italy


I think you can get estimates of the shipping rates page.
Tuesday, March 20, 2007 

Piston/Cylinder 
PISTON KIT (0.50) *REPRO* Forum I´ve to replace my old standard piston with 4 new Repro 0.50! Well my question, the old cylinder need also a new size, which bore-size is optimal working with the new pistons.
Thanks
Meine...
Monday, March 19, 2007 

RUBBER,SADDLE? 
RUBBER,SADDLE Forum Is the product # 81220463770 (Rubber,Saddle) for the seal around the top of the saddle bag the lid seals to? If so, is there a left and right, or does it matter?
Monday, March 19, 2007 

Crankcase assy 
CRANKCASE,ASSY Forum Does this have 9 or 10 bolt clutch provision?
Saturday, March 17, 2007 

DIFFUSER,EXHAUST  
DIFFUSER,EXHAUST Forum Hello I want to buy 4 (pieces)diffuser exhaust
let me know the shipping rate to Italy
thanks
Sergio Rinaldi
Thursday, March 15, 2007 

This leg shield works on 1982-83 USA-types 
COVER,FR. *NH111* Forum This readily available front cover for a Euro/UK C90 (part number 64301-GB4-691ZA) fits American late model Honda C70 Passports (1982-83 12 volt CDI) with one small modification.

Once...
Thursday, March 15, 2007 

Re: Body Panels 
VT1100C SHADOW 1100 1986 US Forum I did find some , well, 'rectangular-ish' panels through this page

Perhaps that's what you were looking for?
Tuesday, March 13, 2007 

Chaly Front Fender 
(61100-124-000ZD) FENDER,FRONT Forum Is this Front Fender (61100-124-000ZD) made out of Metal and if it is does it come in primer ready for spraying?

Kind regards,
Basil Yarde
Monday, March 12, 2007 

Body Panels 
VT1100C SHADOW 1100 1986 US Forum I'm looking for the triangular shaped side panels, if any one can help I'd be gratful
Monday, March 12, 2007 

Helmet Holder 
HOLDER,HELMET Forum Are the helmet holders for the the Chaly and Dax the same. Also is there a difference between a UK helmet holder and helmet holders made for other parts of the world.

Kind regards,

Basil
Monday, March 12, 2007 

On this section

you are here: » home » community » forums » page 297