Soild_

Joined:
2006-07-06 09:31:47

Posts: 5

Posted:Thursday 18 October, 2007 3:33 PM

quote

Subject: Indicators dont indicate

Hi all, my Cb400F just had a fabulous face lift and rebuild but, disaster, all back together, tested the Electrics and worked, but next day not working so well.
My front indicators both light up very dim, so i tested all the conection seems ok, Replaceds the old solid state winker relay that fixed part of the problem, but both front indicator now light up at the same time???

im going to replace the indicators with a extra set that has seperate earthing wires see if that helps.

any one else had issues like this??
would like some help quick is has a resistration inspection in 3 days and needs to pass, or DISASTER.

Thanks Guys/Girls.

Allan Gill

Joined:
2009-09-29 20:28:24

Posts: 11

Posted:Tuesday 29 September, 2009 10:45 PM

quote

Subject: Re: Indicators dont indicate

are you using those patten indicators as opposed to originals, i had 2 patten ones on the back, and constantly tinkering and then a day or so later failing again, i hard wired and earth wires straight to the units, but didn't really work, took them off and managed to get some genuine indicators - problem cured, they need chroming but i can put up with that

hope that helps