Turn Signal schematic Honda Cl450 Scrambler 450 K0 Usa

New, superb genuine Honda indicator assembly. This part is suitable for many classic Hondas, and sometimes in the event where your classic is not covered by this part, fitting these is better than fitting nothing, or worse, damaged or corroded items.
See many other newly produced genuine Honda parts in our online 'parts list' fiche for your model, you may like to order the indicator mounting stalks as well?

It is good news that Honda still produces new parts like these that suit so many classic Hondas from the 1960's and 1970's! It makes the job of restoration just that much easier! The old bodies are tricky and expensive to re-chrome, and rarely turn out quite the way you would like.
Parts like these may not be around forever, so buying a couple of spares might be a sensible bet for the future, just in case!
For plenty of other new production classic Honda parts, check out the online 'parts list' for your model.

The finishing touch to any restoration, especially on a classic Honda, is the fitting of new parts like these indicator lenses, especially if you have also ordered the new indicator bodies.

Rare item - these WINKER SOCKET wiring assembly's generally degrade with cracked insulation and are beyond the skills of any electrician to satisfactorily repair!

With a competitive price like this, for such a high quality component, it really is not worth trying to reuse the original!
For other related components, check out our on-line schematic for your model and ensure you order all the parts you need to complete your task perfectly!

If you wish to keep unsightly and potentially damaging moisture from inside your indicator, then replacing this seal, after removing and refitting your indicator lens would be a sensible precaution.
If you are replacing you indicators with new assemblies, or even part assemblies, check out our online 'parts list' fiche for your classic, it may help you specify exactly the parts you need to complete your task.

New, superb genuine Honda indicator assembly. This part is suitable for many classic Hondas, and sometimes in the event where your classic is not covered by this part, fitting these is better than fitting nothing, or worse, damaged or corroded items.
See many other newly produced genuine Honda parts in our online 'parts list' fiche for your model, you may like to order the indicator mounting stalks as well?

If this rubber part has become damaged and degraded through U.V or just general wear and tear, then replacing sooner rather than later will help keep your indicator assemblies free of damaging vibration.
For other anti vibe parts that may require your attention, check out the online 'parts list' fiche or online catalogue for your model?

Fitting new genuine Honda bulbs will cost only a little more, but will be as good as the bulb was when the bike rolled out of the showroom! So it will fit perfectly and it will be as bright and as durable as the original Honda item. Why would you want to buy a cheaper alternative when the original will work out less expensive in the long term?
For genuine Honda bulbs, that you know will be right for your bike, check out the online catalogue for your model.

Reusing the old screws is simply not worth the unsightly results! The old items may be corroded and have possible thread or head damage - Either way they will be difficult to tighten up properly!
This is the 5 x 8 CROSS-HEAD SCREW(A).

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
9410106000
94001080000S
9410108000
9200006020
9200006016
9411106000
9200006012
9200006028

The importance of using the correct, genuine Honda fasteners in all areas of the machine can never be overstated!
Threads will be accurate, bolts will be hardened and tempered correctly with the correct plated finish - In short it would be unwise, to say the least, to use anything other than genuine Honda fasteners!
This is the 10mm HEX-NUT.

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
94001080000S
9410108000
9200006020
9200006016
9400106000
9411106000
9200006012
9200006028

Your overhaul will be easier to execute and with a more professional outcome when you specify new genuine Honda parts like this 10mm WASHER rather than making do with the old corroded, maybe slightly damaged item!
For other new parts to make your task easier and with better results check out the on-line schematic for your model.

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original - In this case this item should be replaced as a matter of course!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 10mm SPRING WASHER.