Rear Brake Panel / Pedal schematic Honda Cb750 Four K3 Usa

Specifying only genuine Honda brake shoes means that you are buying parts made in Japan to Honda quality control standards.
Specifying only genuine Honda brake shoes means you are fitting the same parts that were deemed good enough by the factory when your machine rolled off the production line.

Specifying only genuine Honda brake shoes means that you are buying parts made in Japan to Honda quality control standards.
Specifying only genuine Honda brake shoes means you are fitting the same parts that were deemed good enough by the factory when your machine rolled off the production line.

It is advisable to renew the brake arm along with the corresponding shoes and springs when replacing the BRAKE CAM with this superb genuine Honda part. The low purchase price means you can replace this vital brake component!

Renewing this part is especially important when renewing the adjustment nut. Using a worn item to interface with anew part is never going to be a complete success.

Renewing this part is especially important when renewing the adjustment nut. Using a worn item to interface with anew part is never going to be a complete success.

This one of those low priced parts that save the trouble of re-plating the old item
And renewing instead. This particularly so when renewing it's associated parts most of which are similarly inexpensive - particularly as they are genuine Honda parts with all the quality that implies

Specifying a Honda spring is your guarantee of correct tension, length, original type finish, and correct grade of materials used in the manufacturing process. It really is as simple as that!

Specifying a Honda spring is your guarantee of correct tension, length, original type finish, and correct grade of materials used in the manufacturing process. It really is as simple as that!

It is advisable to renew this brake rod adjustment nut along with its corresponding trunion (joint). Their low purchase price means they are less expensive to replace than re-plate.

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
9410106000
94001080000S
9410108000
9200006016
9400106000
9411106000
9200006012
9200006028

Given the choice between an old corroded bolt, and a new, nicely plated part, what would you use in the overhaul of your Honda!
Well if we assume correctly, you might like to see all the other new bolts and screws that will help you achieve a thorough and professional job - Check out the schematic for your model!
This is the M8 x 22 HEX HEAD BOLT(A)

Fasteners can be supplied from many sources, buying only genuine Honda parts though will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the M8 x 28 HEX HEAD BOLT(A).

The importance of using the correct, genuine Honda fasteners in all areas of the machine can never be overstated!
Threads will be accurate, bolts will be hardened and tempered correctly with the correct plated finish - In short it would be unwise, to say the least, to use anything other than genuine Honda fasteners!
We recommend that where applicable when using new nuts, new bolts/studs are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 6mm THIN-NUT.

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original - In this case this item should be replaced as a matter of course!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 8mm SPRING WASHER.

Specify GENUINE HONDA fasteners including these spit, cotter and lock pins, you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of pin may be just as good, or they may not!
This is the 1.6mm SPLIT PIN.

Specify GENUINE HONDA fasteners including these spit, cotter and lock pins, you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of pin may be just as good, or they may not!
This is the 2.5 COTTER PIN.