Frame / Wire Harness schematic Honda Cb550k2 Four (usa)

Interference to other electronic receivers like radios, mobiles, TV's etc will be a thing of the past with your classic Honda, when fitted with these suppressor caps. So let your neighbours listen and watch their TV in peace when you crack up your little beauty!
For other genuine Honda parts to further beautify your machine, try browsing the online catalogue for your model?

Fitting genuine Honda suppressor caps, not only ensure reliability, and low interference, they just look better, and that in it self is a good enough reason!
For loads of other new and New Old Stock spares for your classic Honda, browse our online 'parts list' fiche, or the online catalogue for your model.

Fitting genuine Honda suppressor caps, not only ensure reliability, and low interference, they just look better, and that in it self is a good enough reason!
For loads of other new and New Old Stock spares for your classic Honda, browse our online 'parts list' fiche, or the online catalogue for your model.

It is a lot less to renew this important anti vibe protection than your regulator-rectifier this part protects! All rubber parts will degrade over the years, with temperature extremes, UV exposure and general wear and tear.
For many other consumable replacement parts for your Honda, take a look at our online catalogue for your model, and ensure your order ALL the pats you need to complete your basic service, or even a full on restoration!

Fitting the correct battery to any motorcycle is of fundamental importance. This is not just because of having the right power available, but also to perform the function of regulating and absorbing excess power from the alternator. A job that the regulator/rectifier only partly carries out.

It really costs little more to specify a genuine Honda replacement part, than replacing with an unknown, and unproven brand from the Far East. What price peace of mind?
For plenty of other low priced genuine Honda spares, check out the online catalogue for your model.

Keep your classic CB Four Honda completely original, both in the way it looks and its legendary reliability, by specifying only genuine Honda parts. The rectifier does a particularly difficult job (which is why they become warm, and need ventilation) in controlling the charge from the generator to the battery, not allowing it to 'Fry' or worse explode, but maintaining an adequate charge for feeding the coils, and ensuring 'one prod' starting!
Check our online 'parts list' fiche for your classic CB Four, we probably hold more stock for these than any other European specialist!

This terminal cover can be found in many cases at the front of the engine, directly behind the front wheel. Needless to say it has a hard life. If yours is split, degrading and general damaged, don't wait for the influx of moisture and corrosion to stop your starter working, replace with new. It will look nicer as well!
For many other consumable items for your Honda, browse the online catalogue for your model, and make sure all your little parts are protected!

You needn't take our word for it that this new production genuine Honda key set is perfect, our customers tell us that, as you can see from the 5 star recommendation!
Or many other new Honda produced parts for your classic, take a look at the online catalogue for superb images and full descriptions, along with the model application list.
All at just a click of a mouse away from been fitted to your machine!

Restoring any Honda back to showroom condition can be fun, rewarding but also immensely frustrating especially when trying to work out just how to repair and refurbish the ignition switch assembly. Depending on how you value time, we think you would save a lot of time (and time is money?) buy purchasing a new genuine Honda switch and just plugging it in to the wiring harness after screwing it into its mount. Time to do this? Approximately 2 minutes! Time to restore the old switch…………well you decide.

Rear stoplight switches tend to receive more than there fair share of road grime, rock salt spray, and all those types of bike destroying materials, that you would not dream of putting your classic Honda through now!
Sadly, when your bike was new, that is exactly what happened, so what a relief that Honda, for now, still produce these parts to allow you to finish off your restoration to perfection!
To access all current Honda produced 'classic parts' check the online catalogue for your model, don't leave it to long though!

Rear stoplight switches tend to receive more than there fair share of road grime, rock salt spray, and all those types of bike destroying materials, that you would not dream of putting your classic Honda through now!
Sadly, when your bike was new, that is exactly what happened, so what a relief that Honda, for now, still produce these parts to allow you to finish off your restoration to perfection!
To access all current Honda produced 'classic parts' check the online catalogue for your model, don't leave it to long though!

If you want the benefit of one prod starting for your classic Honda, but not getting it, then maybe the starter solenoid is the problem?
Thankfully Honda still go on producing these parts, for now, allowing Classic enthusiasts to enjoy the very thing that made Honda what they are to day, civilized well engineered motorcycles with reliable electric starters, taken for granted today, but class leading innovation back in the early 1960's!
This part fits many classic Honda's so please check the application list carefully to ensure your model is listed for this part number.

A very high quality, genuine Honda part, suitable for many classic Honda's, please check the list below to find if your model is listed.
This part could also be fitted where the exact original is no longer available, or discontinued, classic twins from the 1960's for example, better a horn that looks close, than one that looks like it came from the bottom of a canal!
For many other newly produced, and rarer NOS parts, check out the online 'parts list' fiche for your model, or if you have a few hours to spare, try browsing the 'Discount' pages of our web site.
Even if a part is not exactly right, it can often be a good substitute, especially if you part has the 'from the bottom of a canal look'!

Ensure your classic Honda can wink properly, and not be a failure point on your annual road worthiness test? Fitting this new genuine Honda part will allow your model to wink reliably!
For other electrical items to keep your machine in shape, why not browse the online catalogue, and see the surprising amount of new parts still produced by the Honda factory!

Ensure your classic Honda can wink properly, and not be a failure point on your annual road worthiness test? Fitting this new genuine Honda part will allow your model to wink reliably!
For other electrical items to keep your machine in shape, why not browse the online catalogue, and see the surprising amount of new parts still produced by the Honda factory!

Whatever classic CB Four you own and ride this new genuine Honda part will save you the time and trouble of trying to restore the impossible!
We probably hold more stock for these classic CB Fours than any other European specialist, backed up by our famous online 'parts list' fiche, showing you at a glance, price, availability and with 'zoomify' you can check exactly which parts and there associated numbers you need!

These seat lock assemblies are probably one of the most problematic items to restore, and can take many man hours of time for a very average result! Easier perhaps to replace with a new item, especially at this low price! This items covers many classic Hondas from the 1970's so please check carefully the application list below prior to placing your order.
You may also like to purchase a new seat lock bar to go with this?
77230107711
Most of the classic Hondas this part fits are supported by our online 'parts list' fiche service, why not take a look and see what else you may need to complete your restoration?

Don't allow high frequency vibration to damage any part of your machine, by ensuring these items are replaced as soon as they degrade or become damaged. Why not keep a few spare in your toolbox, they are inexpensive and with a little silicone lubricant applied, easy to fit!
This is the cushion A type, you may also wish to match this up with the cushion type B:
80106061010
To ensure you are aware of where all the anti vibration mounting rubbers are on your machine, try browsing our online 'parts list' fiche where applicable, or our online catalogue?

Renewing this collar when replacing the grommet in which it fits makes for a better and more professional overall job, and not renewing cannot be justified by the high price after all!
So when you are ordering the grommets, why not order these as well?
To make sure you have specified all the parts you need for your order, go to our online catalogue for your model or where applicable, utilize our famous online 'parts list' fiche service?

Genuine Honda tool bag that helps your machine look good on the inside as well, especially if your old tool bag is a torn, worn shredded piece of dirty plastic!
We can often sell out of these 'classic' items quite quickly, so if you do need one, now or perhaps ion the future, and order sooner rather than later may be wise?

This item is one of those most likely to have been used, abused or even misplaced.
They are designed specifically for the models they were used for, so if yours is missing or damaged, take the opportunity to replace it now?
If you show your machine, then you will need a complete tool kit in brand new condition if your are to stand a chance of winning a concourse! Oh, and you may need to check or replace your spark plugs from time to time!

These WASHERS are the sort of parts that are worth keeping in your workshop as a spare for future use as well as immediate application.
To assemble a more comprehensive order, and ensure you have ALL the parts you need, saving money on shipping costs and valuable time later in your workshop when you find an essential item missing!

These 1.5 x 5mm screws are specific to this application and should not be substituted with incorrect none Honda items - At least not if you wish to keep your machine original down to the last screw!

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the M5 x 14 HEX HEAD BOLT.

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
9410106000
94001080000S
9410108000
9200006020
9200006016
9400106000
9411106000
9200006028

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
9410106000
94001080000S
9410108000
9200006016
9400106000
9411106000
9200006012
9200006028

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the M6 x 25 HEX HEAD BOLT.

Specify GENUINE HONDA fasteners and you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of bolt may be just as good, or they may not!
This is the M8 x 40 HEX HEAD BOLT(A).

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
This is the M8 x 100 HEX BOLT(A)

The importance of using the correct, genuine Honda fasteners in all areas of the machine can never be overstated!
Threads will be accurate, bolts will be hardened and tempered correctly with the correct plated finish - In short it would be unwise, to say the least, to use anything other than genuine Honda fasteners!
This is the M10 x50 HEX head bolt(A)

Using as many new fasteners as possible when rebuilding a Honda motorcycle (any Motorcycle actually!) will make the task easier and allow the correct torque to be applied more accurately than reusing old stretched and damaged items! Specifying only genuine Honda parts is just the best way to achieve perfection!
You may wish to view these other related parts:

90107KF0000
90304GE8003
9390425280
964001004007
960010604000

Given the choice between an old corroded fastener, and a new, nicely plated part, what would you use in the overhaul of your Honda!
Well if we assume correctly, you might like to see all the other new bolts, screws, nuts and washers that will help you achieve a thorough and professional job - Check out the schematic for your model!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 6mm FLANGE-NUT.

The importance of using the correct, genuine Honda fasteners in all areas of the machine can never be overstated!
Threads will be accurate, bolts will be hardened and tempered correctly with the correct plated finish - In short it would be unwise, to say the least, to use anything other than genuine Honda fasteners!
We recommend that where applicable when using new nuts, new bolts/studs are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 6mm THIN-NUT.

Given the choice between an old corroded bolt, and a new, nicely plated part, what would you use in the overhaul of your Honda!
Well if we assume correctly, you might like to see all the other new bolts and screws that will help you achieve a thorough and professional job - Check out the schematic for your model!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 12mm HEX-NUT.

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
94001080000S
9410108000
9200006020
9200006016
9400106000
9411106000
9200006012
9200006028

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
94001080000S
9410108000
9200006020
9200006016
9400106000
9411106000
9200006012
9200006028

Your overhaul will be easier to execute and with a more professional outcome when you specify new genuine Honda parts like this 12mm PLAIN WASHER rather than making do with the old corroded, maybe slightly damaged item!
For other new parts to make your task easier and with better results check out the on-line schematic for your model.

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original - In this case this item should be replaced as a matter of course!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 5mm SPRING WASHER.

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original - In this case this item should be replaced as a matter of course!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 8mm SPRING WASHER.

Specify GENUINE HONDA fasteners and you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of washer may be just as good, or they may not!
This is the 12mm SPRING WASHER.

Even if you use the electric starter (where fitted) on your classic Honda, this rubber item will still degrade over the years with UV exposure and general road grime.
Fresh new looking rubber parts like these speak volumes for the image of your bike, and the owner's attention to very last detail!
To check many other detail items that could add the finishing touch to your Honda, check out our online catalogue, and where applicable the online 'parts list' fiche for your model

Ensure the battery in your machine is firmly and correctly attached and secured by using only the correct genuine Honda battery band. A loose battery, or even a to tightly secured battery can lead to damage by acid leaks, short circuits or at best just having to renew the battery more often than would normally be required.

Using the correct genuine Honda pat in every aspect of your restoration or general service, will result in a bike that looks exactly as the factory made it (well after a ground up restoration anyway!)
To make sure you use only the correct Honda parts for all the jobs you carry out on your machine, try browsing the online catalogue for your model? Sometimes just a few Euros spent here and there can add hundreds to the sales value!

So inexpensive it makes the thought of trying to refurbish the old part a joke. Renew with a genuine Honda part and save both time and money in the process

Specify only genuine Honda bearings and use exactly the same bearings as the Honda factory professionals. That is as good as it gets!
These are the size 10 bearings.

Why fit a genuine Honda fuse - No better reason other than it was specified by the factory when your machine was new!
We think that is reason enough, even taking into consideration out low prices, prompt delivery and the confidence enjoyed by fitting a genuine Honda part, not a cheap copy!
Other genuine Honda fuses you may wish to order at the same time:

9820010500
9820011500

Standard issue for so many Honda tool kits for so many models of Honda. Perfect new part, as you would expect give that this is the real thing, not a cheap Far Eastern 'rip-off'!
Ensure your tool kit passes muster, or if it is missing entirely, just this spanner or the complete kit, you now know where you can get them! And, we hope you will agree, at the right price?

This item is one of those most likely to have been used, abused or even misplaced.
They are designed specifically for the models they were used for, so if yours is missing or damaged, take the opportunity to replace it now?
As they frequently are removed and nor replaced by a previous owner, you may find you need this item sooner than you might have imagined!