Frame Group 1l,1m,2l,2m schematic Honda Cb400f (general Export Kph)

Ensure your Honda classic is fully protected, and ensure that all rubber anti vibe and weather protection grommets are replaced whenever they start to degrade. They are not expensive, but do protect parts that are!
Try browsing the online 'parts list' fiche for your model, you might consider purchasing a complete set for your Honda, this will reduce the shipping costs per item, and ensure these important parts are there as soon a you need them.

If this rubber part has become damaged and degraded through U.V or just general wear and tear, then replacing sooner rather than later will help keep your indicator assemblies free of damaging vibration.
For other anti vibe parts that may require your attention, check out the online 'parts list' fiche or online catalogue for your model?

To save soldering a new tail light cord, spend just a few Euro's, and buy a new genuine Honda item. You could use the time saved by polishing the dogs collar, or something like that!
To find many more ways to spend more time with your pet, and less trying to fix parts that are really past it, check the online catalogue for you model, and see just how many new classic Honda parts are still available, and importantly, affordable!

It is a lot less to renew this important anti vibe protection than your regulator-rectifier this part protects! All rubber parts will degrade over the years, with temperature extremes, UV exposure and general wear and tear.
For many other consumable replacement parts for your Honda, take a look at our online catalogue for your model, and ensure your order ALL the pats you need to complete your basic service, or even a full on restoration!

Keep your winker unit free of damaging high frequency vibration, and replace this part when your old rubber item has degraded or become damaged.
To ensure you buy ALL the parts you need for your Honda refurbishment, it is always worth taking a look at our online catalogue for your model. If you are unsure of which parts you need, browsing the 'parts list' fiche on line, could point you in the right direction.

Specify only genuine Honda DRIVE CHAINS and use exactly the same items as the Honda factory professionals - That is as good as it gets!
Please note we only have a few of these original items left - Don't miss out!

The fine thread on this part can easily be damaged, causing cross threading in the softer alloy of the hub itself, renewing the part can avoid a lot more expense and trouble later!
For the rest of the parts you need for a wheel overhaul, try browsing the online catalogue for your model, backed up of course by our user friendly online purchasing system.

Renewing the other parts in this axle assembly at the same time you are replacing this COLLAR will make fitting much easier - interfacing new parts with old bolts and washers can lead to problems and does not look very nice any way!

DID/Honda wheel rim 1.85 x 18" x 36 spoke newly produced rims. Boy did the Honda classic enthusiast ever need this! This rim fits the rear wheel of so many great Honda classics, and will no doubt benefit other Japanese machinery that used DID rims, Yamaha for example. You will not be unable to strip, polish and re-chrome your old rim for this price, and even if you did it would still look like a tired old rim with a fresh flash of chrome!
Don't forget to order your spoke sets as well!

Don't allow high frequency vibration to damage any part of your machine, by ensuring these items are replaced as soon as they degrade or become damaged. Why not keep a few spare in your toolbox, they are inexpensive and with a little silicone applied, easy to fit!
For all the consumable bits and pieces for your Honda, try browsing our online catalogue or 'parts list' fiche, this may help you specify a more comprehensive order taking better advantage of our already low shipping costs?

During the course of refurbishing or renewing the tail light assembly, these anti vibe parts should be replaced for insulating vibration along with these new COLLARS.
Reusing the old corroded collars can damage the rubber during insertion and cause premature failure!

Whilst you may be able to buy a cheaper bolt than this genuine Honda item, with this bolt you know it will fit precisely, will torque up correctly without stretching the thread, and the plated finish will be to Honda standards.
It is really your choice, what price is worth peace of mind!

When reattaching new or refinished parts like the wheels, the machine will look many times better with shiny new fasteners!
Reusing the old dull, maybe damaged item will spoil the appearance, and using none Honda items will take away the machines originality - Either way you need new genuine Honda replacements!

This 8mm WASHER has a number of applications - Whatever your use for this item you can be sure that because it is a genuine Honda part it will be well up to the job and probably better than a none Honda item!

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
This is the M6 x 8 HEX BOLT

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
9410106000
94001080000S
9410108000
9200006020
9400106000
9411106000
9200006012
9200006028

Whilst fasteners can be supplied from many sources, buying only genuine Honda parts will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the M6 x 22 HEX BOLT

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the M6 x 25 HEX HEAD BOLT.

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
9410106000
94001080000S
9410108000
9200006020
9200006016
9400106000
9411106000
9200006012

Specifying only genuine Honda bolts means buying parts made in Japan to Honda quality control standards - Bolts that were deemed good enough by the factory when the machine rolled off the production line.
This is the M8 x 16 HEX BOLT.

Fasteners can be supplied from many sources, buying only genuine Honda parts though will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the M8 x 28 HEX HEAD BOLT(A).

Specify new genuine Honda bolts and know that they will fit exactly like the originals, will look exactly like the originals (when they were new at least!) and will last like the originals! In fact we cannot think of any reason to buy any other type, especially some of the dubious pattern copies available elsewhere!
This is the M8 x 56 HEX BOLT(B).

Given the choice between an old corroded bolt, and a new, nicely plated part, what would you use in the overhaul of your Honda!
Well if we assume correctly, you might like to see all the other new bolts and screws that will help you achieve a thorough and professional job - Check out the schematic for your model!
This is the M8 x 80 HEX HEAD BOLT(A)
You may also be interested in this:

92200080800A

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 6 x 25 HEX HEAD BOLT.

Specify GENUINE HONDA fasteners and you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of bolt may be just as good, or they may not!
This is the 10 x 32 HEX HEAD BOLT.

Great value, high quality genuine Honda PAN and CROSS-HEAD SCREWS.
Being genuine Honda means these items are made from the correct materials and will prove durable over the long term, as you might expect from the world's largest motorcycle manufacturer!
To help you decide which other fastener related components you may require, browse the on-line schematic or the Gallery for your model.
The more parts you order, the less the shipping costs per item!
This is the 4 x 55 CROSS-HEAD SCREW(B).
Related items you may be interested in viewing:


33709092671
33709341671

Reusing the old screws is simply not worth the unsightly results! The old items may be corroded and have possible thread or head damage - Either way they will be difficult to tighten up properly!
This is the 5 x 8 CROSS-HEAD SCREW(A).

Reusing the old screws is simply not worth the unsightly results! The old items may be corroded and have possible thread or head damage - Either way they will be difficult to tighten up properly!
This is the 5 x 16 CROSS-HEAD SCREW(A).

Specifying only genuine Honda screws means buying parts made in Japan to Honda quality control standards - Screws that were deemed good enough by the factory when the machine rolled off the production line.
This is the 5 x 25 PAN-HEAD SCREW(A).

The importance of using the correct, genuine Honda fasteners in all areas of the machine can never be overstated!
Threads will be accurate,screws will be hardened and tempered correctly with the correct plated finish - In short it would be unwise, to say the least, to use anything other than genuine Honda fasteners!
This is the 6 x 16 CROSS-HEAD SCREW(A).

Whilst fasteners can be supplied from many sources, buying only genuine Honda parts will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the 3 x 25 CROSS-HEAD SCREW(B).

Specifying only genuine Honda screws means buying parts made in Japan to Honda quality control standards - Screws that were deemed good enough by the factory when the machine rolled off the production line!
This is the 4 x 10 SELF-TAPPING SCREW.

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
9410106000
9410108000
9200006020
9200006016
9400106000
9411106000
9200006012
9200006028

Using as many new fasteners as possible when rebuilding a Honda motorcycle will make the task easier and allow the correct torque to be applied more accurately than reusing old stretched and damaged items!
Specifying only genuine Honda parts is one of the best ways to achieve perfection!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the SLOTTED-NUT - Don't forget to renew the split-pin!

Using as many new fasteners as possible when rebuilding a Honda motorcycle will make the task easier and allow the correct torque to be applied more accurately than reusing old stretched and damaged items!
Specifying only genuine Honda parts is one of the best ways to achieve perfection!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 8mm HEX CAP-NUT.

Using as many new fasteners as possible when rebuilding a Honda motorcycle will make the task easier and allow the correct torque to be applied more accurately than reusing old stretched and damaged items!
Specifying only genuine Honda parts is one of the best ways to achieve perfection!
We recommend that where applicable when using new nuts, new bolts/studs/spindles/axles are specified at the same time to avoid the old and possibly damaged thread spoiling the new thread!
This is the 10mm HEX-NUT.

Your overhaul will be easier to execute and with a more professional outcome when you specify new genuine Honda parts like this 5mm PLAIN WASHER rather than making do with the old corroded, maybe slightly damaged item!
For other new parts to make your task easier and with better results check out the on-line schematic for your model.

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
9410106000
94001080000S
9200006020
9200006016
9400106000
9411106000
9200006012
9200006028

Whilst fasteners and washers can be supplied from many sources, buying only genuine Honda parts will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the 8mm WASHER.

Whilst fasteners and washers can be supplied from many sources, buying only genuine Honda parts will give the kind of confidence that makes fitting none Honda parts hardly worth the anxiety suffered - When the part either fails prematurely or does not even fit correctly to start with!
This is the 12mm PLAIN WASHER.

We are delighted to ship as much or as little as your order stipulates, but the more comprehensive your order the better value, our already competitive shipping charges become!
So before placing your order for this replacement fastener related component check out the on-line gallery and schematic for your model and get even better value!
Here are just a few suggestions of other possible related fastener parts you may wish to order:

90512300000
9410106000
94001080000S
9410108000
9200006020
9200006016
9400106000
9200006012
9200006028

At a low price like this, for such a high quality component, it really is not worth trying to rejuvenate the original - In this case this item should be replaced as a matter of course!
For other related components, check out our on-line schematic or for your model, and ensure you order all the parts you need to complete your task perfectly!
This is the 10mm SPRING WASHER.

Specify GENUINE HONDA fasteners including these spit, cotter and lock pins, you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of pin may be just as good, or they may not!
This is the 1.6mm SPLIT PIN.

Specify GENUINE HONDA fasteners including these spit, cotter and lock pins, you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of pin may be just as good, or they may not!
This is the 1.6mm COTTER PIN.

Specify GENUINE HONDA fasteners including these spit, cotter and lock pins, you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of pin may be just as good, or they may not!
This is the 2.0 x 15 COTTER PIN.

Specify GENUINE HONDA fasteners including these spit, cotter and lock pins, you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of pin may be just as good, or they may not!
This is the 2.5 COTTER PIN.

Specify GENUINE HONDA fasteners including these spit, cotter and lock pins, you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of pin may be just as good, or they may not!
This is the 4.0mm COTTER PIN.

Specify GENUINE HONDA fasteners including these spit, cotter and lock pins, you will be fitting the very highest quality items that will be both easy to fit and enjoy long term durability - Other makes of pin may be just as good, or they may not!
This is the 6mm LOCK PIN.

Your front forks overhaul will be easier to execute and with a more professional outcome when you specify new genuine Honda parts like this D1 FORK TOP BOLT rather than making do with the old corroded, maybe slightly damaged item!
For other new parts to make your task easier and with better results check out our on-line schematic for your model.

When purchasing bearing assemblies for rebuilding a Honda motorcycle use only genuine Honda bearings, as used in the Honda factory. Anything else is simply not Honda!

Best buy!!! OEM spoke sets mild steel. Click the link
behind the model listing below. You will get redirected to the detail
page of the selected product. You can view the product and
add it your your shopping bag

Rear wheel
CB360T 06420377000
CB360T' 76 06420377000
CB360G 06420377000
CJ360T 06420377000
CJ360T ' 77 06420377000
CB350F 06420377000
CB350F1 06420377000
CB360 06420377000
CL360 06420377000
CL360K1 06420377000
CB400F 06420377000
CB400F1 06420377000
CB400F2 06420377000
CL350K0 06420377000
CL350K2 06420377000
CL350K3 06420377000
CL350K4 06420377000
CL350K5 06420377000
CL250K0 06420377000
CB250K5 06420377000
CB250G5 06420377000
CB450K0 06420283000
CB450K1 06420283000
CB450K2 06420283000
CB450K3 06420283000
CB450K4 06420283000
CB450K5 06420283000
CB450K6 06420283000
CB450K7 06420283000
CL450K0 06420283000
CL450K2 06420283000
CL450K3 06420283000
CL450K4 06420283000
CL450K5 06420283000
CL450K6 06420283000
CB500K 06420283000
CB500K1 06420283000
CB500K '76 06420283000
CB500T 06420283000
CB500T '76 06420283000
CB550K 06420283000
CB550K1 06420283000
CB550K '76 06420283000
CB750K0 06420300000
CB750K1 06420300000
CB750K2 06420300000
CB750K3 06420300000
CB750K4 06420300000
CB750K5 06420300000
CB750K6 06420300000


Front wheel

CB250G5 06440377000
CB350G 06440377000
CB360T 06440377000
CB360T '76 06440377000
CB360G 06440377000
CB350F 06440377000
CB350F1 06440377000
CB400F 06440377000
CB400F1 06440377000
CB400F2 06440377000
CB450K3 06440300000
CB450K4 06440300000
CB450K5 06440300000
CB450K6 06440300000
CB450K7 06440300000
CB500K 06440300000
CB500K1 06440300000
CB500K2 06440300000
CB500T 06440300000
CB500T '76 06440300000
CB550K 06440300000
CB550K1 06440300000
CB550K '76 06440300000
CB550K '77 06440300000
CB550K '78 06440300000
CB550F 06440300000
CB550F '76 06440300000
CB550F '77 06440300000
CB750K0 06440300000
CB750K1 06440300000
CB750K2 06440300000